Mailing List Archive

6500 Doubts
Hello,

I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500 and
5500) and Foundry switches. The backup of these devices is running to all
expect one which is a Cisco CatOS 6500. The config into the routed.db is
hostname:cat5:up and I can ping the switch with the hostname. I can also
use clogin hostname and I'll be prompted to the (enable) console, however
when I do rancid-run into the log files I have this message:

Trying to get all of the configs.
hostname: missed cmd(s): write term all,show port ifindex,show module,dir
sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
version,show flash,show running-config,write term,show boot,dir slot1:,show
inventory raw

I do have other 6500 in the network which rancid works perfectly only this
one is not working.

Any ideas ?

Thanks in advance,

--
Danilo Marques de Gouveia
Re: 6500 Doubts [ In reply to ]
Try the commands manually as the rancid user. Maybe one of them is
hanging.



*From:* rancid-discuss-bounces@shrubbery.net [mailto:
rancid-discuss-bounces@shrubbery.net] *On Behalf Of *Danilo Gouveia
*Sent:* Tuesday, July 31, 2012 12:05 PM
*To:* rancid-discuss@shrubbery.net
*Subject:* [rancid] 6500 Doubts



Hello,



I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500 and
5500) and Foundry switches. The backup of these devices is running to all
expect one which is a Cisco CatOS 6500. The config into the routed.db is
hostname:cat5:up and I can ping the switch with the hostname. I can also
use clogin hostname and I'll be prompted to the (enable) console, however
when I do rancid-run into the log files I have this message:



Trying to get all of the configs.

hostname: missed cmd(s): write term all,show port ifindex,show module,dir
sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
version,show flash,show running-config,write term,show boot,dir slot1:,show
inventory raw



I do have other 6500 in the network which rancid works perfectly only this
one is not working.



Any ideas ?



Thanks in advance,



--
Danilo Marques de Gouveia

E-Mail to and from me, in connection with the transaction
of public business, is subject to the Wyoming Public Records
Act and may be disclosed to third parties.
Re: 6500 Doubts [ In reply to ]
The unique command I had problem was show inventory raw, the other were ok,
however in both switches (the one it works and the one it doesn't) the show
inventory raw fails, if I try only show inventory that is ok.

Any other ideas?

On Wed, Aug 1, 2012 at 4:33 PM, Daniel Schmidt <daniel.schmidt@wyo.gov>wrote:

> Try the commands manually as the rancid user. Maybe one of them is
> hanging.
>
>
>
> *From:* rancid-discuss-bounces@shrubbery.net [mailto:
> rancid-discuss-bounces@shrubbery.net] *On Behalf Of *Danilo Gouveia
> *Sent:* Tuesday, July 31, 2012 12:05 PM
> *To:* rancid-discuss@shrubbery.net
> *Subject:* [rancid] 6500 Doubts
>
>
>
> Hello,
>
>
>
> I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500 and
> 5500) and Foundry switches. The backup of these devices is running to all
> expect one which is a Cisco CatOS 6500. The config into the routed.db is
> hostname:cat5:up and I can ping the switch with the hostname. I can also
> use clogin hostname and I'll be prompted to the (enable) console, however
> when I do rancid-run into the log files I have this message:
>
>
>
> Trying to get all of the configs.
>
> hostname: missed cmd(s): write term all,show port ifindex,show module,dir
> sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
> version,show flash,show running-config,write term,show boot,dir slot1:,show
> inventory raw
>
>
>
> I do have other 6500 in the network which rancid works perfectly only this
> one is not working.
>
>
>
> Any ideas ?
>
>
>
> Thanks in advance,
>
>
>
> --
> Danilo Marques de Gouveia
>
> E-Mail to and from me, in connection with the transaction
> of public business, is subject to the Wyoming Public Records
> Act and may be disclosed to third parties.
>
>
>


--
Atenciosamente / Best Regards,

Danilo Marques de Gouveia
IT - Network Administrator
(19) 3847 8424
Re: 6500 Doubts [ In reply to ]
There isn't any "verbose" or debug mode I can turn it on to find out where
I'm receiving this error?

On Wed, Aug 1, 2012 at 4:44 PM, Danilo Gouveia <pxb368@motorola.com> wrote:

> The unique command I had problem was show inventory raw, the other were
> ok, however in both switches (the one it works and the one it doesn't) the
> show inventory raw fails, if I try only show inventory that is ok.
>
> Any other ideas?
>
>
> On Wed, Aug 1, 2012 at 4:33 PM, Daniel Schmidt <daniel.schmidt@wyo.gov>wrote:
>
>> Try the commands manually as the rancid user. Maybe one of them is
>> hanging.
>>
>>
>>
>> *From:* rancid-discuss-bounces@shrubbery.net [mailto:
>> rancid-discuss-bounces@shrubbery.net] *On Behalf Of *Danilo Gouveia
>> *Sent:* Tuesday, July 31, 2012 12:05 PM
>> *To:* rancid-discuss@shrubbery.net
>> *Subject:* [rancid] 6500 Doubts
>>
>>
>>
>> Hello,
>>
>>
>>
>> I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500
>> and 5500) and Foundry switches. The backup of these devices is running to
>> all expect one which is a Cisco CatOS 6500. The config into the routed.db
>> is hostname:cat5:up and I can ping the switch with the hostname. I can also
>> use clogin hostname and I'll be prompted to the (enable) console, however
>> when I do rancid-run into the log files I have this message:
>>
>>
>>
>> Trying to get all of the configs.
>>
>> hostname: missed cmd(s): write term all,show port ifindex,show module,dir
>> sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
>> version,show flash,show running-config,write term,show boot,dir slot1:,show
>> inventory raw
>>
>>
>>
>> I do have other 6500 in the network which rancid works perfectly only
>> this one is not working.
>>
>>
>>
>> Any ideas ?
>>
>>
>>
>> Thanks in advance,
>>
>>
>>
>> --
>> Danilo Marques de Gouveia
>>
>> E-Mail to and from me, in connection with the transaction
>> of public business, is subject to the Wyoming Public Records
>> Act and may be disclosed to third parties.
>>
>>
>>
>
>
> --
> Atenciosamente / Best Regards,
>
> Danilo Marques de Gouveia
> IT - Network Administrator
> (19) 3847 8424
>



--
Atenciosamente / Best Regards,

Danilo Marques de Gouveia
IT - Network Administrator
(19) 3847 8424