Mailing List Archive

Bandwidth Management
Hi ,
in our network we have all juniper stuff's, our topology are as given below
SSG 350 | | | EX 3200 | | | EX2200 EX2200 | | | | | | 7 L2 SWITCH 6 L2 SWITCH (connected to 7 cabin) (connected to 6 cabin)

we configure near about 13 vlan (svi on both 3200 n 2200 ) 1 for each cabin
our objective that we want to assign fix bandwidth for each vlan for example 1MBPS for vlan 10 , 512 kbps for vlan 20
and we also want if suppose vlan 20 user are not present or not utilizing their assign bandwidth then the allocated bandwidth for vlan 20 must be assign to vlan 10 dynamically
kindly help me how we can achieve that and how if their any document for that so kindly provide me.
Regards
Amit
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: Bandwidth Management [ In reply to ]
Hi , i found that EX 3200 and 2200 can police :
(https://geni-orca.renci.org/trac/wiki/VLANsOnEX3200)

ibaldin# show firewall
family ethernet-switching {
filter qosFilter {
term qosRule {
then {
count qosCounter;
policer testPolicer;
}
}
}
}
policer testPolicer {
if-exceeding {
bandwidth-limit 500k;
burst-size-limit 50k;
}
then discard;
}

ibaldin# show vlans qosVlan
description "QoS VLAN";
vlan-id 250;
interface {
ge-0/0/2.0;
ge-0/0/1.0;
}
filter {
input qosFilter;
}

----- Original Message -----
From: "amit shukla" <amitshukla4u@hotmail.com>
To: <juniper-nsp@puck.nether.net>
Sent: Wednesday, January 04, 2012 8:44 AM
Subject: [j-nsp] Bandwidth Management


>
> Hi ,
> in our network we have all juniper stuff's, our topology are as given
> below

> SSG 350
> | |
> | EX 3200
> | |
> | EX2200 EX2200
> | | |
> | | |
> 7 L2 SWITCH 6 L2 SWITCH (connected to 7
> cabin) (connected to 6 cabin)
>
> we configure near about 13 vlan (svi on both 3200 n 2200 ) 1 for each
> cabin
> our objective that we want to assign fix bandwidth for each vlan for
> example 1MBPS for vlan 10 , 512 kbps for vlan 20
> and we also want if suppose vlan 20 user are not present or not utilizing
> their assign bandwidth then the allocated bandwidth for vlan 20 must be
> assign to vlan 10 dynamically
> kindly help me how we can achieve that and how if their any document for
> that so kindly provide me.
> Regards
> Amit
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp