Mailing List Archive

Cisco wifi signal fluctuations
On Cisco wifi, we started seeing signal fluctuations since 1-2 months. The only change that was done to change windows user preference from 2.4 GHz Radio to 5 GHz radio through a windows group policy change. But this was done in response to the problem reported by certain users.We have lately discovered that some of the neighboring APs opt for same frequency band at 5.0 GHz and also at 2.4 GHz. Reboot of these APs have not helped to choose different frequency band by these APs.Channel assignment is set to be auto and we cannot change it to static though we are aware of definitive AP positions at all floors in campus. The reason being that the controller serves APAC and we do not know the definite / relative positions of different APs.The wireless survey conducted before (when there was no complaint on wifi) did show presence of co-channel interferences in certain areas, but SNR was seen to be very good in all areas of all the floors.
For skype, we have call drop or call noisy complain from users across the three floors irrespective of if they are connected to wifi or LAN.
We are using Cisco WLC 5520 controller.


Regards,Vikash SoroutHand-phone : +91-9013866229Email: vikash_sorout@yahoo.com
Re: Cisco wifi signal fluctuations [ In reply to ]
hi,

do you have any of the WLC settings on such as dynamic power
assignment (which allows the controller to work out neighbour cell
coverage
and reduce the signal to stop much overlap). which 5GHz channels are
being used - if you're using those in DFS space then RADAR detection
means that DAC will kick in and the APs will be changing channel
(which of course, means they'll be doing some clear channel assessment
before
coming back. is the SSID still doing WPA? If so, any MAC check
failures from a dodgy client will cause the AP to enact counter
measures etc etc
really, I'd suggest turning on much logging for this area/building ,
slap it all into a simple ELK setup (just spin one up from available
docker compose
files if needed) - and then browse the resulting dataset with Kibana
etc to see whats going on.

or go and do a proper wireless survey and fix it from base level up :)

alan

On Thu, 18 Jul 2019 at 19:46, Vikash Sorout via NANOG <nanog@nanog.org> wrote:
>
> On Cisco wifi, we started seeing signal fluctuations since 1-2 months. The only change that was done to change windows user preference from 2.4 GHz Radio to 5 GHz radio through a windows group policy change. But this was done in response to the problem reported by certain users.We have lately discovered that some of the neighboring APs opt for same frequency band at 5.0 GHz and also at 2.4 GHz. Reboot of these APs have not helped to choose different frequency band by these APs.Channel assignment is set to be auto and we cannot change it to static though we are aware of definitive AP positions at all floors in campus. The reason being that the controller serves APAC and we do not know the definite / relative positions of different APs.The wireless survey conducted before (when there was no complaint on wifi) did show presence of co-channel interferences in certain areas, but SNR was seen to be very good in all areas of all the floors.
>
> For skype, we have call drop or call noisy complain from users across the three floors irrespective of if they are connected to wifi or LAN.
>
> We are using Cisco WLC 5520 controller.
>
>
>
> Regards,
> Vikash Sorout
> Hand-phone : +91-9013866229
> Email: vikash_sorout@yahoo.com