Mailing List Archive

New Backend - Installation issues
I am building a new Backend - running into some hiccup.

I have the following repo enabled:


- epel
- rpmfusion


I am on CentOS 7, and when i do my install viz:


- yum install mythtv mythweb

I get the following:

Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64
(rpmfusion-free-updates)
Requires: libexiv2.so.12()(64bit)
Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
Requires: qt5-qtbase(x86-64) = 5.6.2
Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
qt5-qtbase(x86-64) = 5.9.2-3.el7
Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
Requires: qt5-qtdeclarative(x86-64) = 5.6.2
Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
Requires: qt5-qtdeclarative(x86-64) = 5.6.2
Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest


Not that I am an expert but am I correct that it seems the rpmfusion is not
being compatible with the epel or base libraries? I can try disabling epel
but wanted to reach out here first to see if there's something I am doing
wrong and/or if epel is needed

Thanks,

Ash.
Re: New Backend - Installation issues [ In reply to ]
> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
> I am building a new Backend - running into some hiccup.
>
> I have the following repo enabled:
>
> epel
> rpmfusion
>
> I am on CentOS 7, and when i do my install viz:
>
> yum install mythtv mythweb
> I get the following:
>
> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64 (rpmfusion-free-updates)
> Requires: libexiv2.so.12()(64bit)
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtbase(x86-64) = 5.6.2
> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
> qt5-qtbase(x86-64) = 5.9.2-3.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> You could try using --skip-broken to work around the problem
> You could try running: rpm -Va --nofiles --nodigest
>
>
> Not that I am an expert but am I correct that it seems the rpmfusion is not being compatible with the epel or base libraries? I can try disabling epel but wanted to reach out here first to see if there's something I am doing wrong and/or if epel is needed
>
> Thanks,
>
> Ash.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org

Ash—

In looking at what the base repo has to offer, I do not see qt5-qtwebkit listed. So, that’s a problem.

What I recommend is to install the qt5 packages to meet dependencies for Myth from the repo which has them and new enough, which is epel, as 5.6.2 is sufficient, and then turn the base repo back on when needed. OR, find a repo which has the version of qt5-qtwebkit which you need to satisfy the requirements of what base repo has, enable that repo, and install… or find the correct RPM, and use yum to install the RPM so yum has a record of the RPM. Decisions, decisions...

There are several ways of skinning the cat here, but what feels more comfortable for you is what matters, really. The main thing is that you won’t be running “yum upgrade” until the packages all get updated to at least a version where everything exists and is version-coherent.

Using EL for myth does carry its share of issues, and this happens to be one of them. I use CentOS for Myth predominantly, and for other things, and I get the system functioning and don’t upgrade it very much. As they say: if it ain’t broke, don’t fix it. ;)

Good luck.

Mike
Re: New Backend - Installation issues [ In reply to ]
On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com>
wrote:

>
> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
> I am building a new Backend - running into some hiccup.
>
> I have the following repo enabled:
>
>
> - epel
> - rpmfusion
>
>
> I am on CentOS 7, and when i do my install viz:
>
>
> - yum install mythtv mythweb
>
> I get the following:
>
> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64
> (rpmfusion-free-updates)
> Requires: libexiv2.so.12()(64bit)
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtbase(x86-64) = 5.6.2
> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
> qt5-qtbase(x86-64) = 5.9.2-3.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> You could try using --skip-broken to work around the problem
> You could try running: rpm -Va --nofiles --nodigest
>
>
> Not that I am an expert but am I correct that it seems the rpmfusion is
> not being compatible with the epel or base libraries? I can try disabling
> epel but wanted to reach out here first to see if there's something I am
> doing wrong and/or if epel is needed
>
> Thanks,
>
> Ash.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
>
> Ash—
>
> In looking at what the base repo has to offer, I do not see qt5-qtwebkit
> listed. So, that’s a problem.
>
> What I recommend is to install the qt5 packages to meet dependencies for
> Myth from the repo which has them and new enough, which is epel, as 5.6.2
> is sufficient, and then turn the base repo back on when needed.
>

Mike
Thanks for the help. Are you saying i should first "disable" the base repo,
do an install of qt5-qtwebkit and then enable the base again?



> OR, find a repo which has the version of qt5-qtwebkit which you need to
> satisfy the requirements of what base repo has, enable that repo, and
> install… or find the correct RPM, and use yum to install the RPM so yum
> has a record of the RPM. Decisions, decisions...
>
> There are several ways of skinning the cat here, but what feels more
> comfortable for you is what matters, really. The main thing is that you
> won’t be running “yum upgrade” until the packages all get updated to at
> least a version where everything exists and is version-coherent.
>
> Using EL for myth does carry its share of issues, and this happens to be
> one of them. I use CentOS for Myth predominantly, and for other things,
> and I get the system functioning and don’t upgrade it very much. As they
> say: if it ain’t broke, don’t fix it. ;)
>
> Good luck.
>
> Mike
> _______________________________________________
>
>
Re: New Backend - Installation issues [ In reply to ]
> On May 10, 2018, at 1:14 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
>
>
> On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com <mailto:mweberjunk01@gmail.com>> wrote:
>
>> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com <mailto:ashu.desai@gmail.com>> wrote:
>>
>> I am building a new Backend - running into some hiccup.
>>
>> I have the following repo enabled:
>>
>> epel
>> rpmfusion
>>
>> I am on CentOS 7, and when i do my install viz:
>>
>> yum install mythtv mythweb
>> I get the following:
>>
>> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64 (rpmfusion-free-updates)
>> Requires: libexiv2.so.12()(64bit)
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtbase(x86-64) = 5.6.2
>> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
>> qt5-qtbase(x86-64) = 5.9.2-3.el7
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>> You could try using --skip-broken to work around the problem
>> You could try running: rpm -Va --nofiles --nodigest
>>
>>
>> Not that I am an expert but am I correct that it seems the rpmfusion is not being compatible with the epel or base libraries? I can try disabling epel but wanted to reach out here first to see if there's something I am doing wrong and/or if epel is needed
>>
>> Thanks,
>>
>> Ash.
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users@mythtv.org <mailto:mythtv-users@mythtv.org>
>> http://lists.mythtv.org/mailman/listinfo/mythtv-users <http://lists.mythtv.org/mailman/listinfo/mythtv-users>
>> http://wiki.mythtv.org/Mailing_List_etiquette <http://wiki.mythtv.org/Mailing_List_etiquette>
>> MythTV Forums: https://forum.mythtv.org <https://forum.mythtv.org/>
>
> Ash—
>
> In looking at what the base repo has to offer, I do not see qt5-qtwebkit listed. So, that’s a problem.
>
> What I recommend is to install the qt5 packages to meet dependencies for Myth from the repo which has them and new enough, which is epel, as 5.6.2 is sufficient, and then turn the base repo back on when needed.
>
> Mike
> Thanks for the help. Are you saying i should first "disable" the base repo, do an install of qt5-qtwebkit and then enable the base again?
>
>
> OR, find a repo which has the version of qt5-qtwebkit which you need to satisfy the requirements of what base repo has, enable that repo, and install… or find the correct RPM, and use yum to install the RPM so yum has a record of the RPM. Decisions, decisions...
>
> There are several ways of skinning the cat here, but what feels more comfortable for you is what matters, really. The main thing is that you won’t be running “yum upgrade” until the packages all get updated to at least a version where everything exists and is version-coherent.
>
> Using EL for myth does carry its share of issues, and this happens to be one of them. I use CentOS for Myth predominantly, and for other things, and I get the system functioning and don’t upgrade it very much. As they say: if it ain’t broke, don’t fix it. ;)
>
> Good luck.
>
> Mike
> _______________________________________________
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org

Ash—

That’s certainly one method, and the first I described. So, yes. First, uninstall all the qt5 stuff so you are starting with a clean slate, then disable base, install all the qt5 dependencies (and, really, all other Myth dependencies), then Myth (I’m assuming you’re using a package rather than compiling from source), and then if needed, re-enable base.

This should do it.

Good luck.

Mike
Re: New Backend - Installation issues [ In reply to ]
---- On Thu, 10 May 2018 19:32:09 +0100 Michael A Weber <mweberjunk01@gmail.com> wrote ----
>
> On May 10, 2018, at 1:14 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
>
> On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com> wrote:
>
> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
> I am building a new Backend - running into some hiccup.
> I have the following repo enabled:
> epel
> rpmfusion
>
> I am on CentOS 7, and when i do my install viz:
> yum install mythtv mythweb
> I get the following:
> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64 (rpmfusion-free-updates) Requires: libexiv2.so.12()(64bit)Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires: qt5-qtbase(x86-64) = 5.6.2 Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base) qt5-qtbase(x86-64) = 5.9.2-3.el7Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires: qt5-qtdeclarative(x86-64) = 5.6.2 Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base) qt5-qtdeclarative(x86-64) = 5.9.2-1.el7Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires: qt5-qtdeclarative(x86-64) = 5.6.2 Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base) qt5-qtdeclarative(x86-64) = 5.9.2-1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
>
> Not that I am an expert but am I correct that it seems the rpmfusion is not being compatible with the epel or base libraries? I can try disabling epel but wanted to reach out here first to see if there's something I am doing wrong and/or if epel is needed
> Thanks,
> Ash. _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
> Ash—
> In looking at what the base repo has to offer, I do not see qt5-qtwebkit listed. So, that’s a problem.
> What I recommend is to install the qt5 packages to meet dependencies for Myth from the repo which has them and new enough, which is epel, as 5.6.2 is sufficient, and then turn the base repo back on when needed.
> Mike Thanks for the help. Are you saying i should first "disable" the base repo, do an install of qt5-qtwebkit and then enable the base again?
> OR, find a repo which has the version of qt5-qtwebkit which you need to satisfy the requirements of what base repo has, enable that repo, and install… or find the correct RPM, and use yum to install the RPM so yum has a record of the RPM. Decisions, decisions...
> There are several ways of skinning the cat here, but what feels more comfortable for you is what matters, really. The main thing is that you won’t be running “yum upgrade” until the packages all get updated to at least a version where everything exists and is version-coherent.
> Using EL for myth does carry its share of issues, and this happens to be one of them. I use CentOS for Myth predominantly, and for other things, and I get the system functioning and don’t upgrade it very much. As they say: if it ain’t broke, don’t fix it. ;)
> Good luck.
> Mike_______________________________________________
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
> Ash—
> That’s certainly one method, and the first I described. So, yes. First, uninstall all the qt5 stuff so you are starting with a clean slate, then disable base, install all the qt5 dependencies (and, really, all other Myth dependencies), then Myth (I’m assuming you’re using a package rather than compiling from source), and then if needed, re-enable base.
> This should do it.
> Good luck.
> Mike_______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>

I cant get this to work on mine. Have you been able to get yours sorted yet Ash?

'yum install --disablerepo=base qt5-qt' results in qt5-qtbase and qt5-qtdeclarative not found. qt5-qtwebkit is present.
feels like i'm being dumb and cant see the woods for the trees.
currently have the centos7 default, elrepo, epel and nux-dextop repos added, with base and epol being the two that come up with the dependency issues.

so whatever combo i've tried with --disablerepo, i still have dependency issues stopping me installing mythtv-frontend package (i'm trying to get an FE rebuilt).



_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org
Re: New Backend - Installation issues [ In reply to ]
On Fri, May 11, 2018 at 5:51 AM Tim Draper <veehexx@zoho.com> wrote:

>
>
>
> ---- On Thu, 10 May 2018 19:32:09 +0100 Michael A Weber <
> mweberjunk01@gmail.com> wrote ----
> >
> > On May 10, 2018, at 1:14 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
> >
> >
> > On Thu, May 10, 2018 at 12:56 PM Michael A Weber <
> mweberjunk01@gmail.com> wrote:
> >
> > On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
> > I am building a new Backend - running into some hiccup.
> > I have the following repo enabled:
> > epel
> > rpmfusion
> >
> > I am on CentOS 7, and when i do my install viz:
> > yum install mythtv mythweb
> > I get the following:
> > Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64
> (rpmfusion-free-updates) Requires: libexiv2.so.12()(64bit)Error:
> Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires:
> qt5-qtbase(x86-64) = 5.6.2 Installing:
> qt5-qtbase-5.9.2-3.el7.x86_64 (base) qt5-qtbase(x86-64) =
> 5.9.2-3.el7Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2 Available:
> qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7Error: Package:
> qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires:
> qt5-qtdeclarative(x86-64) = 5.6.2 Installing:
> qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7 You could try using --skip-broken
> to work around the problem You could try running: rpm -Va --nofiles
> --nodigest
> >
> > Not that I am an expert but am I correct that it seems the rpmfusion is
> not being compatible with the epel or base libraries? I can try disabling
> epel but wanted to reach out here first to see if there's something I am
> doing wrong and/or if epel is needed
> > Thanks,
> > Ash. _______________________________________________
> > mythtv-users mailing list
> > mythtv-users@mythtv.org
> > http://lists.mythtv.org/mailman/listinfo/mythtv-users
> > http://wiki.mythtv.org/Mailing_List_etiquette
> > MythTV Forums: https://forum.mythtv.org
> >
> > Ash—
> > In looking at what the base repo has to offer, I do not see
> qt5-qtwebkit listed. So, that’s a problem.
> > What I recommend is to install the qt5 packages to meet dependencies
> for Myth from the repo which has them and new enough, which is epel, as
> 5.6.2 is sufficient, and then turn the base repo back on when needed.
> > Mike Thanks for the help. Are you saying i should first "disable" the
> base repo, do an install of qt5-qtwebkit and then enable the base again?
> > OR, find a repo which has the version of qt5-qtwebkit which you need
> to satisfy the requirements of what base repo has, enable that repo, and
> install… or find the correct RPM, and use yum to install the RPM so yum
> has a record of the RPM. Decisions, decisions...
> > There are several ways of skinning the cat here, but what feels more
> comfortable for you is what matters, really. The main thing is that you
> won’t be running “yum upgrade” until the packages all get updated to at
> least a version where everything exists and is version-coherent.
> > Using EL for myth does carry its share of issues, and this happens to
> be one of them. I use CentOS for Myth predominantly, and for other things,
> and I get the system functioning and don’t upgrade it very much. As they
> say: if it ain’t broke, don’t fix it. ;)
> > Good luck.
> > Mike_______________________________________________
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users@mythtv.org
> > http://lists.mythtv.org/mailman/listinfo/mythtv-users
> > http://wiki.mythtv.org/Mailing_List_etiquette
> > MythTV Forums: https://forum.mythtv.org
> >
> > Ash—
> > That’s certainly one method, and the first I described. So, yes.
> First, uninstall all the qt5 stuff so you are starting with a clean slate,
> then disable base, install all the qt5 dependencies (and, really, all other
> Myth dependencies), then Myth (I’m assuming you’re using a package rather
> than compiling from source), and then if needed, re-enable base.
> > This should do it.
> > Good luck.
> > Mike_______________________________________________
> >
>
> I cant get this to work on mine. Have you been able to get yours sorted
> yet Ash?
>
> 'yum install --disablerepo=base qt5-qt' results in qt5-qtbase and
> qt5-qtdeclarative not found. qt5-qtwebkit is present.
> feels like i'm being dumb and cant see the woods for the trees.
> currently have the centos7 default, elrepo, epel and nux-dextop repos
> added, with base and epol being the two that come up with the dependency
> issues.
>
> so whatever combo i've tried with --disablerepo, i still have dependency
> issues stopping me installing mythtv-frontend package (i'm trying to get an
> FE rebuilt).
>
>
>
NO luck so far. No matter what I disable and/or enable, nothing works. I
know this wasn't the case just couple weeks or a month back because I had
temporarily created a backend briefly then without issue.

Nonetheless, as it stands, I can't install mythtv at all.

Here is the dependency issues I am getting:

https://pastebin.com/wRNfzG2n
Re: New Backend - Installation issues [ In reply to ]
On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com>
wrote:

>
> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
> I am building a new Backend - running into some hiccup.
>
> I have the following repo enabled:
>
>
> - epel
> - rpmfusion
>
>
> I am on CentOS 7, and when i do my install viz:
>
>
> - yum install mythtv mythweb
>
> I get the following:
>
> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64
> (rpmfusion-free-updates)
> Requires: libexiv2.so.12()(64bit)
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtbase(x86-64) = 5.6.2
> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
> qt5-qtbase(x86-64) = 5.9.2-3.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> You could try using --skip-broken to work around the problem
> You could try running: rpm -Va --nofiles --nodigest
>
>
> Not that I am an expert but am I correct that it seems the rpmfusion is
> not being compatible with the epel or base libraries? I can try disabling
> epel but wanted to reach out here first to see if there's something I am
> doing wrong and/or if epel is needed
>
> Thanks,
>
> Ash.
>
>
> Ash—
>
> In looking at what the base repo has to offer, I do not see qt5-qtwebkit
> listed. So, that’s a problem.
>
> What I recommend is to install the qt5 packages to meet dependencies for
> Myth from the repo which has them and new enough, which is epel, as 5.6.2
> is sufficient, and then turn the base repo back on when needed. OR, find a
> repo which has the version of qt5-qtwebkit which you need to satisfy the
> requirements of what base repo has, enable that repo, and install… or find
> the correct RPM, and use yum to install the RPM so yum has a record of the
> RPM. Decisions, decisions...
>
>
I tried using EPEL but they don't have the 5.6.x rpm for the qt5 stuff


> There are several ways of skinning the cat here, but what feels more
> comfortable for you is what matters, really. The main thing is that you
> won’t be running “yum upgrade” until the packages all get updated to at
> least a version where everything exists and is version-coherent.
>

At this point I don't know any method to do this - again - pls note that I
can work around based off instructions on linux and do "some"
troubleshooting, def NOT a guru who can take a link and get to some end
result - so apologies if you have to spell it out twice.

>
> Using EL for myth does carry its share of issues, and this happens to be
> one of them. I use CentOS for Myth predominantly, and for other things,
> and I get the system functioning and don’t upgrade it very much. As they
> say: if it ain’t broke, don’t fix it. ;)
>
> Good luck.
>
> Mike
> __
Re: New Backend - Installation issues [ In reply to ]
> On May 11, 2018, at 10:34 AM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
>
>
> On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com <mailto:mweberjunk01@gmail.com>> wrote:
>
>> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com <mailto:ashu.desai@gmail.com>> wrote:
>>
>> I am building a new Backend - running into some hiccup.
>>
>> I have the following repo enabled:
>>
>> epel
>> rpmfusion
>>
>> I am on CentOS 7, and when i do my install viz:
>>
>> yum install mythtv mythweb
>> I get the following:
>>
>> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64 (rpmfusion-free-updates)
>> Requires: libexiv2.so.12()(64bit)
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtbase(x86-64) = 5.6.2
>> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
>> qt5-qtbase(x86-64) = 5.9.2-3.el7
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>> You could try using --skip-broken to work around the problem
>> You could try running: rpm -Va --nofiles --nodigest
>>
>>
>> Not that I am an expert but am I correct that it seems the rpmfusion is not being compatible with the epel or base libraries? I can try disabling epel but wanted to reach out here first to see if there's something I am doing wrong and/or if epel is needed
>>
>> Thanks,
>>
>> Ash.
>>
>
> Ash—
>
> In looking at what the base repo has to offer, I do not see qt5-qtwebkit listed. So, that’s a problem.
>
> What I recommend is to install the qt5 packages to meet dependencies for Myth from the repo which has them and new enough, which is epel, as 5.6.2 is sufficient, and then turn the base repo back on when needed. OR, find a repo which has the version of qt5-qtwebkit which you need to satisfy the requirements of what base repo has, enable that repo, and install… or find the correct RPM, and use yum to install the RPM so yum has a record of the RPM. Decisions, decisions...
>
>
> I tried using EPEL but they don't have the 5.6.x rpm for the qt5 stuff
>
> There are several ways of skinning the cat here, but what feels more comfortable for you is what matters, really. The main thing is that you won’t be running “yum upgrade” until the packages all get updated to at least a version where everything exists and is version-coherent.
>
> At this point I don't know any method to do this - again - pls note that I can work around based off instructions on linux and do "some" troubleshooting, def NOT a guru who can take a link and get to some end result - so apologies if you have to spell it out twice.
>
> Using EL for myth does carry its share of issues, and this happens to be one of them. I use CentOS for Myth predominantly, and for other things, and I get the system functioning and don’t upgrade it very much. As they say: if it ain’t broke, don’t fix it. ;)
>
> Good luck.
>
> Mike
> __
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org

I’ve done some digging and I see the problems.

I’ve also read that there have been some issues with qt5 5.9, so rather than try to go up to that version, let’s go back down to 5.6 version. Supposedly, it does still exist in base repo, but I am unaware of how to select it manually. From what I see, it’s for CentOS 7.4.1708, and yours may be newer at this point. Worst case scenario is you download the packages you need (base, declarative, etc) and install those using yum against the RPM files, and then use epel repo to install the webkit, which fails due to dependencies from base repo.

The problem appears that qt5-qtwebkit has not been updated in epel, where base and declarative and others have been updated in base.

Good luck!

Mike
Re: New Backend - Installation issues [ In reply to ]
On Fri, May 11, 2018 at 10:47 AM Michael A Weber <mweberjunk01@gmail.com>
wrote:

>
> On May 11, 2018, at 10:34 AM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
>
>
> On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com>
> wrote:
>
>>
>> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com> wrote:
>>
>> I am building a new Backend - running into some hiccup.
>>
>> I have the following repo enabled:
>>
>>
>> - epel
>> - rpmfusion
>>
>>
>> I am on CentOS 7, and when i do my install viz:
>>
>>
>> - yum install mythtv mythweb
>>
>> I get the following:
>>
>> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64
>> (rpmfusion-free-updates)
>> Requires: libexiv2.so.12()(64bit)
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtbase(x86-64) = 5.6.2
>> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
>> qt5-qtbase(x86-64) = 5.9.2-3.el7
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>> You could try using --skip-broken to work around the problem
>> You could try running: rpm -Va --nofiles --nodigest
>>
>>
>> Not that I am an expert but am I correct that it seems the rpmfusion is
>> not being compatible with the epel or base libraries? I can try disabling
>> epel but wanted to reach out here first to see if there's something I am
>> doing wrong and/or if epel is needed
>>
>> Thanks,
>>
>> Ash.
>>
>>
>> Ash—
>>
>> In looking at what the base repo has to offer, I do not see qt5-qtwebkit
>> listed. So, that’s a problem.
>>
>> What I recommend is to install the qt5 packages to meet dependencies for
>> Myth from the repo which has them and new enough, which is epel, as 5.6.2
>> is sufficient, and then turn the base repo back on when needed. OR, find a
>> repo which has the version of qt5-qtwebkit which you need to satisfy the
>> requirements of what base repo has, enable that repo, and install… or find
>> the correct RPM, and use yum to install the RPM so yum has a record of the
>> RPM. Decisions, decisions...
>>
>>
> I tried using EPEL but they don't have the 5.6.x rpm for the qt5 stuff
>
>
>> There are several ways of skinning the cat here, but what feels more
>> comfortable for you is what matters, really. The main thing is that you
>> won’t be running “yum upgrade” until the packages all get updated to at
>> least a version where everything exists and is version-coherent.
>>
>
> At this point I don't know any method to do this - again - pls note that I
> can work around based off instructions on linux and do "some"
> troubleshooting, def NOT a guru who can take a link and get to some end
> result - so apologies if you have to spell it out twice.
>
>>
>> Using EL for myth does carry its share of issues, and this happens to be
>> one of them. I use CentOS for Myth predominantly, and for other things,
>> and I get the system functioning and don’t upgrade it very much. As they
>> say: if it ain’t broke, don’t fix it. ;)
>>
>> Good luck.
>>
>> Mike
>> __
>
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
>
> I’ve done some digging and I see the problems.
>
> I’ve also read that there have been some issues with qt5 5.9, so rather
> than try to go up to that version, let’s go back down to 5.6 version.
> Supposedly, it does still exist in base repo, but I am unaware of how to
> select it manually.
>

Exactly my sentiments - I do not know how to get these. I tried searching
from the RPMs online but even though EPEL and CentOS lists it - clicking on
it takes you to a 5.9.x binary

I have always got screwed if I enabled the nux-desktop repo so I am very
skeptical of turning those on.



> From what I see, it’s for CentOS 7.4.1708, and yours may be newer at this
> point. Worst case scenario is you download the packages you need (base,
> declarative, etc) and install those using yum against the RPM files, and
> then use epel repo to install the webkit, which fails due to dependencies
> from base repo.
>

I am on 7.5

cat /etc/centos-release
CentOS Linux release 7.5.1804 (Core)



>
> The problem appears that qt5-qtwebkit has not been updated in epel, where
> base and declarative and others have been updated in base.
>
> Good luck!
>
> Mike
>
> ______
>

No idea what my next step should be...
Re: New Backend - Installation issues [ In reply to ]
> On May 11, 2018, at 11:00 AM, Ashu Desai <ashu.desai@gmail.com> wrote:
>
>
>
> On Fri, May 11, 2018 at 10:47 AM Michael A Weber <mweberjunk01@gmail.com <mailto:mweberjunk01@gmail.com>> wrote:
>
>> On May 11, 2018, at 10:34 AM, Ashu Desai <ashu.desai@gmail.com <mailto:ashu.desai@gmail.com>> wrote:
>>
>>
>>
>> On Thu, May 10, 2018 at 12:56 PM Michael A Weber <mweberjunk01@gmail.com <mailto:mweberjunk01@gmail.com>> wrote:
>>
>>> On May 10, 2018, at 12:18 PM, Ashu Desai <ashu.desai@gmail.com <mailto:ashu.desai@gmail.com>> wrote:
>>>
>>> I am building a new Backend - running into some hiccup.
>>>
>>> I have the following repo enabled:
>>>
>>> epel
>>> rpmfusion
>>>
>>> I am on CentOS 7, and when i do my install viz:
>>>
>>> yum install mythtv mythweb
>>> I get the following:
>>>
>>> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64 (rpmfusion-free-updates)
>>> Requires: libexiv2.so.12()(64bit)
>>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>>> Requires: qt5-qtbase(x86-64) = 5.6.2
>>> Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
>>> qt5-qtbase(x86-64) = 5.9.2-3.el7
>>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>>> Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>>> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>>> Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>>> Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>>> qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>>> You could try using --skip-broken to work around the problem
>>> You could try running: rpm -Va --nofiles --nodigest
>>>
>>>
>>> Not that I am an expert but am I correct that it seems the rpmfusion is not being compatible with the epel or base libraries? I can try disabling epel but wanted to reach out here first to see if there's something I am doing wrong and/or if epel is needed
>>>
>>> Thanks,
>>>
>>> Ash.
>>>
>>
>> Ash—
>>
>> In looking at what the base repo has to offer, I do not see qt5-qtwebkit listed. So, that’s a problem.
>>
>> What I recommend is to install the qt5 packages to meet dependencies for Myth from the repo which has them and new enough, which is epel, as 5.6.2 is sufficient, and then turn the base repo back on when needed. OR, find a repo which has the version of qt5-qtwebkit which you need to satisfy the requirements of what base repo has, enable that repo, and install… or find the correct RPM, and use yum to install the RPM so yum has a record of the RPM. Decisions, decisions...
>>
>>
>> I tried using EPEL but they don't have the 5.6.x rpm for the qt5 stuff
>>
>> There are several ways of skinning the cat here, but what feels more comfortable for you is what matters, really. The main thing is that you won’t be running “yum upgrade” until the packages all get updated to at least a version where everything exists and is version-coherent.
>>
>> At this point I don't know any method to do this - again - pls note that I can work around based off instructions on linux and do "some" troubleshooting, def NOT a guru who can take a link and get to some end result - so apologies if you have to spell it out twice.
>>
>> Using EL for myth does carry its share of issues, and this happens to be one of them. I use CentOS for Myth predominantly, and for other things, and I get the system functioning and don’t upgrade it very much. As they say: if it ain’t broke, don’t fix it. ;)
>>
>> Good luck.
>>
>> Mike
>> __
>>
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users@mythtv.org <mailto:mythtv-users@mythtv.org>
>> http://lists.mythtv.org/mailman/listinfo/mythtv-users <http://lists.mythtv.org/mailman/listinfo/mythtv-users>
>> http://wiki.mythtv.org/Mailing_List_etiquette <http://wiki.mythtv.org/Mailing_List_etiquette>
>> MythTV Forums: https://forum.mythtv.org <https://forum.mythtv.org/>
>
> I’ve done some digging and I see the problems.
>
> I’ve also read that there have been some issues with qt5 5.9, so rather than try to go up to that version, let’s go back down to 5.6 version. Supposedly, it does still exist in base repo, but I am unaware of how to select it manually.
>
> Exactly my sentiments - I do not know how to get these. I tried searching from the RPMs online but even though EPEL and CentOS lists it - clicking on it takes you to a 5.9.x binary
>
> I have always got screwed if I enabled the nux-desktop repo so I am very skeptical of turning those on.
>
>
> From what I see, it’s for CentOS 7.4.1708, and yours may be newer at this point. Worst case scenario is you download the packages you need (base, declarative, etc) and install those using yum against the RPM files, and then use epel repo to install the webkit, which fails due to dependencies from base repo.
>
> I am on 7.5
>
> cat /etc/centos-release
> CentOS Linux release 7.5.1804 (Core)
>
>
>
> The problem appears that qt5-qtwebkit has not been updated in epel, where base and declarative and others have been updated in base.
>
> Good luck!
>
> Mike
>
> ______
>
> No idea what my next step should be...
> _______________________________________________
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org

Ash—

I searched for:

qt5-qtdeclarative el7.x86_64

and it lead me to this URL:

http://rpmfind.net/linux/RPM/centos/7.4.1708/x86_64/Packages/qt5-qtdeclarative-5.6.2-1.el7.x86_64.html <http://rpmfind.net/linux/RPM/centos/7.4.1708/x86_64/Packages/qt5-qtdeclarative-5.6.2-1.el7.x86_64.html>

And, on that page near the top is the correct package name, and when I click it, I download the correct version.

Check it out. This is the actual link address which you can use with wget on your backend:

http://rpmfind.net/linux/centos/7.4.1708/os/x86_64/Packages/qt5-qtdeclarative-5.6.2-1.el7.x86_64.rpm

Don’t forget to do the same thing for qt5-qtbase, and first. ;)

Mike
Re: New Backend - Installation issues [ In reply to ]
On 05/10/2018 01:18 PM, Ashu Desai wrote:
> I am on CentOS 7, and when i do my install viz:
>
> * yum install mythtv mythweb
>
> I get the following:
>
> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64
> (rpmfusion-free-updates)
>            Requires: libexiv2.so.12()(64bit)
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>            Requires: qt5-qtbase(x86-64) = 5.6.2
>            Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base)
>                qt5-qtbase(x86-64) = 5.9.2-3.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>            Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>            Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>                qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
> Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel)
>            Requires: qt5-qtdeclarative(x86-64) = 5.6.2
>            Installing: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base)
>                qt5-qtdeclarative(x86-64) = 5.9.2-1.el7
>  You could try using --skip-broken to work around the problem
>  You could try running: rpm -Va --nofiles --nodigest
>
>
> Not that I am an expert but am I correct that it seems the rpmfusion
> is not being compatible with the epel or base libraries? I can try
> disabling epel but wanted to reach out here first to see if there's
> something I am doing wrong and/or if epel is needed
>
> Thanks,
>
> Ash.

You need a newer qt5-qtwebkit which is currently in epel-testing -- not
yet promoted to epel. Not that Centos 7 just updated from Centos 7.4 to
Centos 7.5 which is why Qt is upgrading from 5.6 to 5.9.
Re: New Backend - Installation issues [ In reply to ]
---- On Fri, 11 May 2018 19:30:47 +0100 Ken Bass <kbass@kenbass.com> wrote ----
> On 05/10/2018 01:18 PM, Ashu Desai wrote:
> I am on CentOS 7, and when i do my install viz:
> yum install mythtv mythweb
> I get the following:
> Error: Package: mythtv-libs-29.1-15.20180228.8.g925ceea0fb.el7.x86_64 (rpmfusion-free-updates) Requires: libexiv2.so.12()(64bit) Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires: qt5-qtbase(x86-64) = 5.6.2 Installing: qt5-qtbase-5.9.2-3.el7.x86_64 (base) qt5-qtbase(x86-64) = 5.9.2-3.el7 Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires: qt5-qtdeclarative(x86-64) = 5.6.2 Available: qt5-qtdeclarative-5.9.2-1.el7.x86_64 (base) qt5-qtdeclarative(x86-64) = 5.9.2-1.el7 Error: Package: qt5-qtwebkit-5.6.2-1.el7.x86_64 (epel) Requires: qt5-qtdeclarative(x86-64) = 5.6.2 Installing: qt5-qtdeclarative-5.9.2-1.el7.x
86_64 (base) qt5-qtdeclarative(x86-64) = 5.9.2-1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
>
> Not that I am an expert but am I correct that it seems the rpmfusion is not being compatible with the epel or base libraries? I can try disabling epel but wanted to reach out here first to see if there's something I am doing wrong and/or if epel is needed
> Thanks,
> Ash.
> You need a newer qt5-qtwebkit which is currently in epel-testing -- not yet promoted to epel. Not that Centos 7 just updated from Centos 7.4 to Centos 7.5 which is why Qt is upgrading from 5.6 to 5.9.

I span up a centos VM on 7.5, with epel, epel-testing and nux enabled. qt5 issues are sorted now but just one more failed dependency:

Error: Package: mythtv-libs-29.0-1.el7.nux.x86_64 (nux-dextop)
Requires: libexiv2.so.12()(64bit)
You could try using --skip-broken to work around the problem

closest i can find is libgexiv2 (note the 'g'). Unfortunately I've ran out of time to test and investigate further as i'm away for the weekend now. i've got as far as this url for a bit of info which might explain or contain a fix (not looked at it fully yet): https://access.redhat.com/discussions/3414821
does seem to sugest that nux-dextop needs to update his repo for centos7.5 support where as 7.4 worked fine.

_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org
Re: New Backend - Installation issues [ In reply to ]
On 05/11/2018 05:17 PM, Tim Draper wrote:
> I span up a centos VM on 7.5, with epel, epel-testing and nux enabled. qt5 issues are sorted now but just one more failed dependency:
>
> Error: Package: mythtv-libs-29.0-1.el7.nux.x86_64 (nux-dextop)
> Requires: libexiv2.so.12()(64bit)
> You could try using --skip-broken to work around the problem
>
> closest i can find is libgexiv2 (note the 'g'). Unfortunately I've ran out of time to test and investigate further as i'm away for the weekend now. i've got as far as this url for a bit of info which might explain or contain a fix (not looked at it fully yet): https://access.redhat.com/discussions/3414821
> does seem to sugest that nux-dextop needs to update his repo for centos7.5 support where as 7.4 worked fine.

You are probably correct about nux-dextop needing to update since Centos
7.5 is so new. I build MythTV from source so I haven't had to deal with
any repo issues.
However, I just looked on my system and I have the following installed:

exiv2.x86_64
0.26-3.el7                                                     @cr
exiv2-devel.x86_64
0.26-3.el7                                                     @cr
exiv2-libs.x86_64
0.26-3.el7                                                     @cr

That @cr is the Centos-CR (continuous release repo). That is kind of
like 'testing' and should end up in the normal Centos repo at some point.
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org
Re: New Backend - Installation issues [ In reply to ]
---- On Fri, 11 May 2018 23:23:09 +0100 Ken Bass <kbass@kenbass.com> wrote ----
> On 05/11/2018 05:17 PM, Tim Draper wrote:
> > I span up a centos VM on 7.5, with epel, epel-testing and nux enabled. qt5 issues are sorted now but just one more failed dependency:
> >
> > Error: Package: mythtv-libs-29.0-1.el7.nux.x86_64 (nux-dextop)
> > Requires: libexiv2.so.12()(64bit)
> > You could try using --skip-broken to work around the problem
> >
> > closest i can find is libgexiv2 (note the 'g'). Unfortunately I've ran out of time to test and investigate further as i'm away for the weekend now. i've got as far as this url for a bit of info which might explain or contain a fix (not looked at it fully yet): https://access.redhat.com/discussions/3414821
> > does seem to sugest that nux-dextop needs to update his repo for centos7.5 support where as 7.4 worked fine.
>
> You are probably correct about nux-dextop needing to update since Centos
> 7.5 is so new. I build MythTV from source so I haven't had to deal with
> any repo issues.
> However, I just looked on my system and I have the following installed:
>
> exiv2.x86_64
> 0.26-3.el7 @cr
> exiv2-devel.x86_64
> 0.26-3.el7 @cr
> exiv2-libs.x86_64
> 0.26-3.el7 @cr
>
> That @cr is the Centos-CR (continuous release repo). That is kind of
> like 'testing' and should end up in the normal Centos repo at some point.

fwiw, my centos7.5 VM with epel&nux repos is working now. no test repos needed. Not sure if i'll rebuild my primary FE back onto centos, but the debian install with source mythtv seems to be running well. At least that distro is the similar to my rPi's; prefer to work with one distro than many but horses for courses...

_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org