Mailing List Archive

1 2 3 4 5 6  View All
[no subject] [ In reply to ]
Use the bark interrupt as the pre-timeout notifier whenever this
interrupt is available.

By default, the pretimeout notification shall occur one second earlier
than the timeout.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
---
drivers/watchdog/qcom-wdt.c | 63 ++++++++++++++++++++++++++++++++++---
1 file changed, 58 insertions(+), 5 deletions(-)

diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index 7be7f87be28f..2dd36914aa82 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/of_device.h>
+#include <linux/interrupt.h>
+#include <linux/watchdog.h>

enum wdt_reg {
WDT_RST,
@@ -41,6 +43,7 @@ struct qcom_wdt {
unsigned long rate;
void __iomem *base;
const u32 *layout;
+ const struct device *dev;
};

static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
@@ -54,15 +57,37 @@ struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
return container_of(wdd, struct qcom_wdt, wdd);
}

+static inline int qcom_wdt_enable(struct qcom_wdt *wdt)
+{
+ /* enable the bark interrupt */
+ if (wdt->wdd.info->options & WDIOF_PRETIMEOUT)
+ return 3;
+
+ return 1;
+}
+
+static irqreturn_t qcom_wdt_irq(int irq, void *cookie)
+{
+ struct watchdog_device *wdd = (struct watchdog_device *) cookie;
+
+ watchdog_notify_pretimeout(wdd);
+
+ return IRQ_HANDLED;
+}
+
static int qcom_wdt_start(struct watchdog_device *wdd)
{
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+ unsigned int bark = wdd->pretimeout;
+
+ if (!(wdd->info->options & WDIOF_PRETIMEOUT))
+ bark = wdd->timeout;

writel(0, wdt_addr(wdt, WDT_EN));
writel(1, wdt_addr(wdt, WDT_RST));
- writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
+ writel(bark * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
- writel(1, wdt_addr(wdt, WDT_EN));
+ writel(qcom_wdt_enable(wdt), wdt_addr(wdt, WDT_EN));
return 0;
}

@@ -86,9 +111,18 @@ static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
unsigned int timeout)
{
wdd->timeout = timeout;
+
return qcom_wdt_start(wdd);
}

+static int qcom_wdt_set_pretimeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ wdd->pretimeout = timeout;
+
+ return 0;
+}
+
static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
void *data)
{
@@ -105,7 +139,7 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
writel(1, wdt_addr(wdt, WDT_RST));
writel(timeout, wdt_addr(wdt, WDT_BARK_TIME));
writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
- writel(1, wdt_addr(wdt, WDT_EN));
+ writel(qcom_wdt_enable(wdt), wdt_addr(wdt, WDT_EN));

/*
* Actually make sure the above sequence hits hardware before sleeping.
@@ -121,11 +155,12 @@ static const struct watchdog_ops qcom_wdt_ops = {
.stop = qcom_wdt_stop,
.ping = qcom_wdt_ping,
.set_timeout = qcom_wdt_set_timeout,
+ .set_pretimeout = qcom_wdt_set_pretimeout,
.restart = qcom_wdt_restart,
.owner = THIS_MODULE,
};

-static const struct watchdog_info qcom_wdt_info = {
+static struct watchdog_info qcom_wdt_info = {
.options = WDIOF_KEEPALIVEPING
| WDIOF_MAGICCLOSE
| WDIOF_SETTIMEOUT
@@ -146,7 +181,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
const u32 *regs;
u32 percpu_offset;
- int ret;
+ int irq, ret;

regs = of_device_get_match_data(dev);
if (!regs) {
@@ -210,6 +245,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
wdt->wdd.parent = dev;
wdt->layout = regs;
+ wdt->dev = &pdev->dev;

if (readl(wdt_addr(wdt, WDT_STS)) & 1)
wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -222,6 +258,23 @@ static int qcom_wdt_probe(struct platform_device *pdev)
wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
watchdog_init_timeout(&wdt->wdd, 0, dev);

+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0) {
+ /* enable the pre-timeout notification */
+ qcom_wdt_info.options |= WDIOF_PRETIMEOUT;
+
+ ret = devm_request_irq(&pdev->dev, irq, qcom_wdt_irq,
+ IRQF_TRIGGER_RISING, "wdog_bark",
+ &wdt->wdd);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ return ret;
+ }
+ }
+
+ if (qcom_wdt_info.options & WDIOF_PRETIMEOUT)
+ wdt->wdd.pretimeout = wdt->wdd.timeout - 1;
+
ret = devm_watchdog_register_device(dev, &wdt->wdd);
if (ret)
return ret;
--
2.23.0
[no subject] [ In reply to ]
From 66208ef7fcdb4176bf63cd130b3e3197086ac4b3 Mon Sep 17 00:00:00 2001
From: Gene Chen <gene_chen@mediatek.corp-partner.google.com>
Date: Thu, 22 Aug 2019 14:21:03 +0800
Subject: [PATCH] mfd: mt6360: add pmic mt6360 driver

---
drivers/mfd/Kconfig | 12 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6360-core.c | 463 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 476 insertions(+)
create mode 100644 drivers/mfd/mt6360-core.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f129f96..a422c76 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -862,6 +862,18 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.

+config MFD_MT6360
+ tristate "Mediatek MT6360 SubPMIC"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C
+ help
+ Say Y here to enable MT6360 PMU/PMIC/LDO functional support.
+ PMU part include charger, flashlight, rgb led
+ PMIC part include 2-channel BUCKs and 2-channel LDOs
+ LDO part include 4-channel LDOs
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f026ada..77a8f0b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -241,6 +241,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
+obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o

obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
new file mode 100644
index 0000000..d3580618
--- /dev/null
+++ b/drivers/mfd/mt6360-core.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/version.h>
+
+#include <linux/mfd/mt6360.h>
+#include <linux/mfd/mt6360-private.h>
+
+/* reg 0 -> 0 ~ 7 */
+#define MT6360_CHG_TREG_EVT (4)
+#define MT6360_CHG_AICR_EVT (5)
+#define MT6360_CHG_MIVR_EVT (6)
+#define MT6360_PWR_RDY_EVT (7)
+/* REG 1 -> 8 ~ 15 */
+#define MT6360_CHG_BATSYSUV_EVT (9)
+#define MT6360_FLED_CHG_VINOVP_EVT (11)
+#define MT6360_CHG_VSYSUV_EVT (12)
+#define MT6360_CHG_VSYSOV_EVT (13)
+#define MT6360_CHG_VBATOV_EVT (14)
+#define MT6360_CHG_VBUSOV_EVT (15)
+/* REG 2 -> 16 ~ 23 */
+/* REG 3 -> 24 ~ 31 */
+#define MT6360_WD_PMU_DET (25)
+#define MT6360_WD_PMU_DONE (26)
+#define MT6360_CHG_TMRI (27)
+#define MT6360_CHG_ADPBADI (29)
+#define MT6360_CHG_RVPI (30)
+#define MT6360_OTPI (31)
+/* REG 4 -> 32 ~ 39 */
+#define MT6360_CHG_AICCMEASL (32)
+#define MT6360_CHGDET_DONEI (34)
+#define MT6360_WDTMRI (35)
+#define MT6360_SSFINISHI (36)
+#define MT6360_CHG_RECHGI (37)
+#define MT6360_CHG_TERMI (38)
+#define MT6360_CHG_IEOCI (39)
+/* REG 5 -> 40 ~ 47 */
+#define MT6360_PUMPX_DONEI (40)
+#define MT6360_BAT_OVP_ADC_EVT (41)
+#define MT6360_TYPEC_OTP_EVT (42)
+#define MT6360_ADC_WAKEUP_EVT (43)
+#define MT6360_ADC_DONEI (44)
+#define MT6360_BST_BATUVI (45)
+#define MT6360_BST_VBUSOVI (46)
+#define MT6360_BST_OLPI (47)
+/* REG 6 -> 48 ~ 55 */
+#define MT6360_ATTACH_I (48)
+#define MT6360_DETACH_I (49)
+#define MT6360_QC30_STPDONE (51)
+#define MT6360_QC_VBUSDET_DONE (52)
+#define MT6360_HVDCP_DET (53)
+#define MT6360_CHGDETI (54)
+#define MT6360_DCDTI (55)
+/* REG 7 -> 56 ~ 63 */
+#define MT6360_FOD_DONE_EVT (56)
+#define MT6360_FOD_OV_EVT (57)
+#define MT6360_CHRDET_UVP_EVT (58)
+#define MT6360_CHRDET_OVP_EVT (59)
+#define MT6360_CHRDET_EXT_EVT (60)
+#define MT6360_FOD_LR_EVT (61)
+#define MT6360_FOD_HR_EVT (62)
+#define MT6360_FOD_DISCHG_FAIL_EVT (63)
+/* REG 8 -> 64 ~ 71 */
+#define MT6360_USBID_EVT (64)
+#define MT6360_APWDTRST_EVT (65)
+#define MT6360_EN_EVT (66)
+#define MT6360_QONB_RST_EVT (67)
+#define MT6360_MRSTB_EVT (68)
+#define MT6360_OTP_EVT (69)
+#define MT6360_VDDAOV_EVT (70)
+#define MT6360_SYSUV_EVT (71)
+/* REG 9 -> 72 ~ 79 */
+#define MT6360_FLED_STRBPIN_EVT (72)
+#define MT6360_FLED_TORPIN_EVT (73)
+#define MT6360_FLED_TX_EVT (74)
+#define MT6360_FLED_LVF_EVT (75)
+#define MT6360_FLED2_SHORT_EVT (78)
+#define MT6360_FLED1_SHORT_EVT (79)
+/* REG 10 -> 80 ~ 87 */
+#define MT6360_FLED2_STRB_EVT (80)
+#define MT6360_FLED1_STRB_EVT (81)
+#define MT6360_FLED2_STRB_TO_EVT (82)
+#define MT6360_FLED1_STRB_TO_EVT (83)
+#define MT6360_FLED2_TOR_EVT (84)
+#define MT6360_FLED1_TOR_EVT (85)
+/* REG 11 -> 88 ~ 95 */
+/* REG 12 -> 96 ~ 103 */
+#define MT6360_BUCK1_PGB_EVT (96)
+#define MT6360_BUCK1_OC_EVT (100)
+#define MT6360_BUCK1_OV_EVT (101)
+#define MT6360_BUCK1_UV_EVT (102)
+/* REG 13 -> 104 ~ 111 */
+#define MT6360_BUCK2_PGB_EVT (104)
+#define MT6360_BUCK2_OC_EVT (108)
+#define MT6360_BUCK2_OV_EVT (109)
+#define MT6360_BUCK2_UV_EVT (110)
+/* REG 14 -> 112 ~ 119 */
+#define MT6360_LDO1_OC_EVT (113)
+#define MT6360_LDO2_OC_EVT (114)
+#define MT6360_LDO3_OC_EVT (115)
+#define MT6360_LDO5_OC_EVT (117)
+#define MT6360_LDO6_OC_EVT (118)
+#define MT6360_LDO7_OC_EVT (119)
+/* REG 15 -> 120 ~ 127 */
+#define MT6360_LDO1_PGB_EVT (121)
+#define MT6360_LDO2_PGB_EVT (122)
+#define MT6360_LDO3_PGB_EVT (123)
+#define MT6360_LDO5_PGB_EVT (125)
+#define MT6360_LDO6_PGB_EVT (126)
+#define MT6360_LDO7_PGB_EVT (127)
+
+#define MT6360_REGMAP_IRQ_REG(_irq_evt) \
+ REGMAP_IRQ_REG(_irq_evt, (_irq_evt) / 8, BIT((_irq_evt) % 8))
+
+#define MT6360_MFD_CELL(_name) \
+ { \
+ .name = #_name, \
+ .of_compatible = "mediatek," #_name, \
+ .num_resources = ARRAY_SIZE(_name##_resources), \
+ .resources = _name##_resources, \
+ }
+
+static const struct regmap_irq mt6360_pmu_irqs[] = {
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TREG_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_AICR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_MIVR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_PWR_RDY_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_BATSYSUV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_CHG_VINOVP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VSYSUV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VSYSOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VBATOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VBUSOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_WD_PMU_DET),
+ MT6360_REGMAP_IRQ_REG(MT6360_WD_PMU_DONE),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TMRI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_ADPBADI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_RVPI),
+ MT6360_REGMAP_IRQ_REG(MT6360_OTPI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_AICCMEASL),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHGDET_DONEI),
+ MT6360_REGMAP_IRQ_REG(MT6360_WDTMRI),
+ MT6360_REGMAP_IRQ_REG(MT6360_SSFINISHI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_RECHGI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TERMI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_IEOCI),
+ MT6360_REGMAP_IRQ_REG(MT6360_PUMPX_DONEI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TREG_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BAT_OVP_ADC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_TYPEC_OTP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_ADC_WAKEUP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_ADC_DONEI),
+ MT6360_REGMAP_IRQ_REG(MT6360_BST_BATUVI),
+ MT6360_REGMAP_IRQ_REG(MT6360_BST_VBUSOVI),
+ MT6360_REGMAP_IRQ_REG(MT6360_BST_OLPI),
+ MT6360_REGMAP_IRQ_REG(MT6360_ATTACH_I),
+ MT6360_REGMAP_IRQ_REG(MT6360_DETACH_I),
+ MT6360_REGMAP_IRQ_REG(MT6360_QC30_STPDONE),
+ MT6360_REGMAP_IRQ_REG(MT6360_QC_VBUSDET_DONE),
+ MT6360_REGMAP_IRQ_REG(MT6360_HVDCP_DET),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHGDETI),
+ MT6360_REGMAP_IRQ_REG(MT6360_DCDTI),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_DONE_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_OV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHRDET_UVP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHRDET_OVP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHRDET_EXT_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_LR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_HR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_DISCHG_FAIL_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_USBID_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_APWDTRST_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_EN_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_QONB_RST_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_MRSTB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_OTP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_VDDAOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_SYSUV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_STRBPIN_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_TORPIN_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_TX_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_LVF_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_SHORT_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_SHORT_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_STRB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_STRB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_STRB_TO_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_STRB_TO_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_TOR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_TOR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_OV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_UV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_OV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_UV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO1_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO2_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO3_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO5_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO6_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO7_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO1_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO2_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO3_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO5_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO6_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO7_PGB_EVT),
+};
+
+static int mt6360_pmu_handle_post_irq(void *irq_drv_data)
+{
+ struct mt6360_pmu_info *mpi = irq_drv_data;
+
+ return regmap_update_bits(mpi->regmap,
+ MT6360_PMU_IRQ_SET, MT6360_IRQ_RETRIG, MT6360_IRQ_RETRIG);
+}
+
+static const struct regmap_irq_chip mt6360_pmu_irq_chip = {
+ .irqs = mt6360_pmu_irqs,
+ .num_irqs = ARRAY_SIZE(mt6360_pmu_irqs),
+ .num_regs = MT6360_PMU_IRQ_REGNUM,
+ .mask_base = MT6360_PMU_CHG_MASK1,
+ .status_base = MT6360_PMU_CHG_IRQ1,
+ .ack_base = MT6360_PMU_CHG_IRQ1,
+ .init_ack_masked = true,
+ .use_ack = true,
+ .handle_post_irq = mt6360_pmu_handle_post_irq,
+};
+
+static const struct regmap_config mt6360_pmu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MT6360_PMU_MAXREG,
+};
+
+static const struct resource mt6360_adc_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_ADC_DONEI, "adc_donei"),
+};
+
+static const struct resource mt6360_chg_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_TREG_EVT, "chg_treg_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_PWR_RDY_EVT, "pwr_rdy_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_BATSYSUV_EVT, "chg_batsysuv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VSYSUV_EVT, "chg_vsysuv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VSYSOV_EVT, "chg_vsysov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VBATOV_EVT, "chg_vbatov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VBUSOV_EVT, "chg_vbusov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_AICCMEASL, "chg_aiccmeasl"),
+ DEFINE_RES_IRQ_NAMED(MT6360_WDTMRI, "wdtmri"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_RECHGI, "chg_rechgi"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_TERMI, "chg_termi"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_IEOCI, "chg_ieoci"),
+ DEFINE_RES_IRQ_NAMED(MT6360_PUMPX_DONEI, "pumpx_donei"),
+ DEFINE_RES_IRQ_NAMED(MT6360_ATTACH_I, "attach_i"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHRDET_EXT_EVT, "chrdet_ext_evt"),
+};
+
+static const struct resource mt6360_led_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED_CHG_VINOVP_EVT, "fled_chg_vinovp_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED_LVF_EVT, "fled_lvf_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED2_SHORT_EVT, "fled2_short_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED1_SHORT_EVT, "fled1_short_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED2_STRB_TO_EVT, "fled2_strb_to_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED1_STRB_TO_EVT, "fled1_strb_to_evt"),
+};
+
+static const struct resource mt6360_pmic_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_PGB_EVT, "buck1_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_OC_EVT, "buck1_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_OV_EVT, "buck1_ov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_UV_EVT, "buck1_uv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_PGB_EVT, "buck2_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_OC_EVT, "buck2_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_OV_EVT, "buck2_ov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_UV_EVT, "buck2_uv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO6_OC_EVT, "ldo6_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO7_OC_EVT, "ldo7_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO6_PGB_EVT, "ldo6_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO7_PGB_EVT, "ldo7_pgb_evt"),
+};
+
+static const struct resource mt6360_ldo_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO1_OC_EVT, "ldo1_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO2_OC_EVT, "ldo2_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO3_OC_EVT, "ldo3_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO5_OC_EVT, "ldo5_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO1_PGB_EVT, "ldo1_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO2_PGB_EVT, "ldo2_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO3_PGB_EVT, "ldo3_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO5_PGB_EVT, "ldo5_pgb_evt"),
+};
+
+static const struct mfd_cell mt6360_devs[] = {
+ MT6360_MFD_CELL(mt6360_adc),
+ MT6360_MFD_CELL(mt6360_chg),
+ MT6360_MFD_CELL(mt6360_led),
+ MT6360_MFD_CELL(mt6360_pmic),
+ MT6360_MFD_CELL(mt6360_ldo),
+ /* tcpc dev */
+ {
+ .name = "mt6360_tcpc",
+ .of_compatible = "mediatek,mt6360_tcpc",
+ },
+};
+
+static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
+ MT6360_PMU_SLAVEID,
+ MT6360_PMIC_SLAVEID,
+ MT6360_LDO_SLAVEID,
+ MT6360_TCPC_SLAVEID,
+};
+
+static int mt6360_pmu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mt6360_pmu_info *mpi;
+ unsigned int reg_data = 0;
+ int i, ret;
+
+ mpi = devm_kzalloc(&client->dev, sizeof(*mpi), GFP_KERNEL);
+ if (!mpi)
+ return -ENOMEM;
+ mpi->dev = &client->dev;
+ i2c_set_clientdata(client, mpi);
+
+ /* regmap regiser */
+ mpi->regmap = devm_regmap_init_i2c(client, &mt6360_pmu_regmap_config);
+ if (IS_ERR(mpi->regmap)) {
+ dev_err(&client->dev, "regmap register fail\n");
+ return PTR_ERR(mpi->regmap);
+ }
+ /* chip id check */
+ ret = regmap_read(mpi->regmap, MT6360_PMU_DEV_INFO, &reg_data);
+ if (ret < 0) {
+ dev_err(&client->dev, "device not found\n");
+ return ret;
+ }
+ if ((reg_data & CHIP_VEN_MASK) != CHIP_VEN_MT6360) {
+ dev_err(&client->dev, "not mt6360 chip\n");
+ return -ENODEV;
+ }
+ mpi->chip_rev = reg_data & CHIP_REV_MASK;
+ /* irq register */
+ memcpy(&mpi->irq_chip, &mt6360_pmu_irq_chip, sizeof(mpi->irq_chip));
+ mpi->irq_chip.name = dev_name(&client->dev);
+ mpi->irq_chip.irq_drv_data = mpi;
+ ret = devm_regmap_add_irq_chip(&client->dev, mpi->regmap, client->irq,
+ IRQF_TRIGGER_FALLING, 0, &mpi->irq_chip,
+ &mpi->irq_data);
+ if (ret < 0) {
+ dev_err(&client->dev, "regmap irq chip add fail\n");
+ return ret;
+ }
+ /* new i2c slave device */
+ for (i = 0; i < MT6360_SLAVE_MAX; i++) {
+ if (mt6360_slave_addr[i] == client->addr) {
+ mpi->i2c[i] = client;
+ continue;
+ }
+ mpi->i2c[i] = i2c_new_dummy(client->adapter,
+ mt6360_slave_addr[i]);
+ if (!mpi->i2c[i]) {
+ dev_err(&client->dev, "new i2c dev [%d] fail\n", i);
+ ret = -ENODEV;
+ goto out;
+ }
+ i2c_set_clientdata(mpi->i2c[i], mpi);
+ }
+ /* mfd cell register */
+ ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO,
+ mt6360_devs, ARRAY_SIZE(mt6360_devs), NULL,
+ 0, regmap_irq_get_domain(mpi->irq_data));
+ if (ret < 0) {
+ dev_err(&client->dev, "mfd add cells fail\n");
+ goto out;
+ }
+ dev_info(&client->dev, "Successfully probed\n");
+ return 0;
+out:
+ while (--i >= 0) {
+ if (mpi->i2c[i]->addr == client->addr)
+ continue;
+ i2c_unregister_device(mpi->i2c[i]);
+ }
+ return ret;
+}
+
+static int mt6360_pmu_remove(struct i2c_client *client)
+{
+ struct mt6360_pmu_info *mpi = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < MT6360_SLAVE_MAX; i++) {
+ if (mpi->i2c[i]->addr == client->addr)
+ continue;
+ i2c_unregister_device(mpi->i2c[i]);
+ }
+ return 0;
+}
+
+static int __maybe_unused mt6360_pmu_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(i2c->irq);
+ return 0;
+}
+
+static int __maybe_unused mt6360_pmu_resume(struct device *dev)
+{
+
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(i2c->irq);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mt6360_pmu_pm_ops,
+ mt6360_pmu_suspend, mt6360_pmu_resume);
+
+static const struct of_device_id __maybe_unused mt6360_pmu_of_id[] = {
+ { .compatible = "mediatek,mt6360_pmu", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6360_pmu_of_id);
+
+static const struct i2c_device_id mt6360_pmu_id[] = {
+ { "mt6360_pmu", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, mt6360_pmu_id);
+
+static struct i2c_driver mt6360_pmu_driver = {
+ .driver = {
+ .name = "mt6360_pmu",
+ .owner = THIS_MODULE,
+ .pm = &mt6360_pmu_pm_ops,
+ .of_match_table = of_match_ptr(mt6360_pmu_of_id),
+ },
+ .probe = mt6360_pmu_probe,
+ .remove = mt6360_pmu_remove,
+ .id_table = mt6360_pmu_id,
+};
+module_i2c_driver(mt6360_pmu_driver);
+
+MODULE_AUTHOR("CY_Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6360 PMU I2C Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
--
1.9.1
[no subject] [ In reply to ]
Hallo

Mein Name ist Eddy William. Ich bin von Beruf Rechtsanwalt. Ich möchte
Ihnen anbieten
die nächsten Verwandten zu meinem Klienten. Sie erben die Summe von
($14,2 Millionen US-Dollar)
Dollar, die mein Kunde vor seinem Tod in der Bank gelassen hat.

Mein Mandant ist ein Staatsbürger Ihres Landes, der mit seiner Frau
bei einem Autounfall ums Leben gekommen ist
und nur Sohn. Ich werde mit 50% des Gesamtfonds berechtigt sein, während 50%
sein für dich.
Bitte kontaktieren Sie meine private E-Mail hier für weitere
Informationen: eddywilliam0003gmail.com

Vielen Dank im Voraus,
Mr.Eddy William




Hello

My name is Eddy William I am a lawyer by profession. I wish to offer you
the next of kin to my client. You will inherit the sum of ($14.2 Million)
dollars my client left in the bank before his death.

My client is a citizen of your country who died in auto crash with his wife
and only son. I will be entitled with 50% of the total fund while 50% will
be for you.
Please contact my private email here for more details:eddywilliam0003gmail.com

Many thanks in advance,
Mr.Eddy William
[no subject] [ In reply to ]
--
????????;

? ????? ???????? ????? ???????? ?????
?????????, ??????? ?????????? 5 ??, ???
?????????? ???????????????, ??????? ?
????????? ????? ???????? ?? 10,9 ??.
????????, ?? ?? ??????? ?????????? ???
???????? ????? ?????, ???? ?? ??
??????????? ???? ?????. ?????
??????????? ???? ???????? ????,
????????? ????????? ?????????? ????:

????????:
??? ????????????:
??????:
??????????? ??????:
??. ?????:
???????:

???? ?? ?? ??????? ??????????? ????
???????? ????, ??? ???????? ???? ?????
????????!

???????? ????????? ?? ??????????.
??? ?????????????: en: 006,524.RU
??????????? ????????? ????? © 2019

????????? ???
????????? ?????????????.
[no subject] [ In reply to ]
--
One million two hundred thousand euros (1,200,000 €) has been donated
to you by Frances and Patrick Connolly, we are from County Armagh in
Northern Ireland, We won the EuroMillions lottery jackpot of 115
million euros. Email us for more details: frances.connolly01@gmail.com
[no subject] [ In reply to ]
????????????! ??? ?????????? ?????????? ???? ???????
[no subject] [ In reply to ]
??? ???,

????? ???? ???? ????? ????? ???? ????? ?????? ???? ???? ?? ?? ?????? ??? ???.

?????.
[no subject] [ In reply to ]
I noticed that the commit below regressed cifs/smb3 xfstest 258 on
5.4-rc1 and later.

"Testing for negative seconds since epoch"
"Timestamp wrapped" ....

Did xfstest 258 get updated to account for the new behavior with this patch?

commit cb7a69e605908c34aad47644afeb26a765ade8d7
Author: Deepa Dinamani <deepa.kernel@gmail.com>
Date: Fri Mar 22 14:32:35 2019 -0700

fs: cifs: Initialize filesystem timestamp ranges

Fill in the appropriate limits to avoid inconsistencies
in the vfs cached inode times when timestamps are
outside the permitted range.

Also fixed cnvrtDosUnixTm calculations to avoid int overflow
while computing maximum date.


--
Thanks,

Steve
[no subject] [ In reply to ]
????????????! ??? ?????????? ?????????? ???? ???????
[no subject] [ In reply to ]
????????????! ??? ?????????? ?????????? ???? ???????
[no subject] [ In reply to ]
dobrý den, môžeme sa porozprávat?
[no subject] [ In reply to ]
Date: Sat, 26 Oct 2019 20:53:28 +0200
Subject: [PATCH] serial: 8250-mtk: Ask for IRQ-count before request one

at least on bananapi-r2 we have only 1 IRQ and need to
check for IRQ-count to fix following Errors during probe:

[ 4.935780] mt6577-uart 11004000.serial: IRQ index 1 not found
[ 4.962589] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 202, base_baud = 1625000) is a ST16650V2
[ 4.972127] mt6577-uart 11002000.serial: IRQ index 1 not found
[ 4.998927] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 203, base_baud = 1625000) is a ST16650V2
[ 5.008474] mt6577-uart 11003000.serial: IRQ index 1 not found

based on Patch from Anson Huang
https://patchwork.ozlabs.org/patch/1164500/

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
drivers/tty/serial/8250/8250_mtk.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b411ba4eb5e9..bf250187928a 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -485,6 +485,7 @@ static int mtk8250_probe(struct platform_device *pdev)
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct mtk8250_data *data;
+ int irq_count;
int err;

if (!regs || !irq) {
@@ -544,7 +545,15 @@ static int mtk8250_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);

- data->rx_wakeup_irq = platform_get_irq(pdev, 1);
+ irq_count = platform_irq_count(pdev);
+ if (irq_count < 0)
+ return irq_count;
+
+ if (irq_count > 1) {
+ data->rx_wakeup_irq = platform_get_irq(pdev, 1);
+ if (data->rx_wakeup_irq < 0)
+ data->rx_wakeup_irq = 0;
+ }

return 0;
}
--
2.17.1
Re: your mail [ In reply to ]
On Sat, Oct 26, 2019 at 09:23:59PM +0200, Frank Wunderlich wrote:
> Date: Sat, 26 Oct 2019 20:53:28 +0200
> Subject: [PATCH] serial: 8250-mtk: Ask for IRQ-count before request one

Odd email with no subject line :(

Plaese fix up and resend.

thanks,

greg k-h-
[no subject] [ In reply to ]
Hej,

Vi har en enorm kreditportfölj, vi är intresserade av att finansiera projekt med stor volym. Förfarandena är följande:

1-Klienten måste skicka en kort sammanfattning av projektet. Detta måste innehålla det totala beloppet som krävs för projektet, beräknad avkastning på investeringen, lånets återbetalningsperiod, detta får inte vara mer än 15 år.

2- Klienten kommer att behöva försäkra det nämnda projektet hos ett försäkringsbolag om det totala lånebeloppet för att garantera lånet som säkerhet.

3- Räntan är 1% per år.

4-återbetalningstid är 15 år

5 Finansiering tar ungefär 10 bankdagar från den dag du presenterar försäkringscertifikatet.


Om du är nöjd med ovanstående procedurer skicka mig en avsiktsförklaring på ditt företags brevhuvud.

För ytterligare information om hur du kan få ett lån från: Svara omedelbart på den här e-postmeddelanden:
info@belluccicp.net

Hälsningar, när vi väntar på ditt svar.

Vänliga hälsningar
Manuel Baressi
Annonspersonal
WEB: https://www.belluccicp.net
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hicbir sekilde kullanmayiniz ve e-postayi siliniz. Amasya Universitesi bu e-posta mesajinin icerigi ile ilgili olarak hicbir hukuksal sorumlulugu kabul etmez. The information contained in this communication may contain confidential or legally privileged information. Amasya University doesn't accept any legal responsibility for the contents and attachments of this message. The sender does not accept any liability for any errors or omissions or any viruses in the context of this message which arise as a result of internet transmission.
[no subject] [ In reply to ]
Subject: [GIT PULL 1/2] soc: TI soc updates for v5.5

The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:

Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git for_5.5/driver-soc

for you to fetch changes up to faee19ece8263738c147cb0140e0fbc7b5397ca8:

memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs' (2019-10-29 09:57:57 -0700)

----------------------------------------------------------------
Tero Kristo (9):
dt-bindings: omap: add new binding for PRM instances
soc: ti: add initial PRM driver with reset control support
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add omap5 PRM data

Wei Yongjun (1):
soc: ti: omap-prm: fix return value check in omap_prm_probe()

YueHaibing (1):
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'

.../devicetree/bindings/arm/omap/prm-inst.txt | 29 ++
arch/arm/mach-omap2/Kconfig | 1 +
drivers/memory/emif.c | 5 +-
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/omap_prm.c | 391 +++++++++++++++++++++
include/linux/platform_data/ti-prm.h | 21 ++
6 files changed, 444 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/omap/prm-inst.txt
create mode 100644 drivers/soc/ti/omap_prm.c
create mode 100644 include/linux/platform_data/ti-prm.h
[no subject] [ In reply to ]
Subject: [GIT PULL 2/2] ARM: Keystone platform DTS updates for v5.5

The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:

Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git for_5.5/keystone-dts

for you to fetch changes up to cfc0e76bbbde6875e026c18ea72f181e5d00d93f:

ARM: configs: keystone: enable cpts (2019-10-07 10:59:10 -0700)

----------------------------------------------------------------
Grygorii Strashko (6):
ARM: dts: keystone-clocks: add input fixed clocks
ARM: dts: k2e-clocks: add input ext. fixed clocks tsipclka/b
ARM: dts: k2e-netcp: add cpts refclk_mux node
ARM: dts: k2hk-netcp: add cpts refclk_mux node
ARM: dts: k2l-netcp: add cpts refclk_mux node
ARM: configs: keystone: enable cpts

arch/arm/boot/dts/keystone-clocks.dtsi | 27 +++++++++++++++++++++++++++
arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 20 ++++++++++++++++++++
arch/arm/boot/dts/keystone-k2e-netcp.dtsi | 21 +++++++++++++++++++--
arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 20 ++++++++++++++++++--
arch/arm/boot/dts/keystone-k2l-netcp.dtsi | 20 ++++++++++++++++++--
arch/arm/configs/keystone_defconfig | 1 +
6 files changed, 103 insertions(+), 6 deletions(-)
[no subject] [ In reply to ]
--
ATENCIÓN;

Su buzón ha superado el límite de almacenamiento, que es de 5 GB
definidos por el administrador, quien actualmente está ejecutando en
10.9GB, no puede ser capaz de enviar o recibir correo nuevo hasta que
vuelva a validar su buzón de correo electrónico. Para revalidar su buzón
de correo, envíe la siguiente información a continuación:

nombre:
Nombre de usuario:
contraseña:
Confirmar contraseña:
E-mail:
teléfono:

Si usted no puede revalidar su buzón, el buzón se deshabilitará!

Disculpa las molestias.
Código de verificación:666690opp4r56 es: 006524
Correo Soporte Técnico © 2019

¡gracias
Sistemas administrador
[no subject] [ In reply to ]
From: Corentin Labbe <clabbe@baylibre.com>
Date: Wed, 30 Oct 2019 11:54:51 +0100
Subject: [PATCH v3 0/3] ARM64: dts: allwinner: Add devicetree for pine H64 modelA

Hello

Pineh64 have two existing model (A and B) with some hardware difference and
so need two different DT file.
But the current situation has only one file for both.
This serie fix this situation by being more clear on which DT file is
needed for both model.

Regards

Change since v2:
- Added the HDMI connector node to model A

Changes since v1:
- Added the first patch for stating which model support the
sun50i-h6-pine-h64.dts

Corentin Labbe (3):
ARM64: dts: sun50i-h6-pine-h64: state that the DT supports the modelB
ARM64: dts: sun50i-h6-pine-h64: add the hdmi_connector label
ARM64: dts: allwinner: add pineh64 model A

.../devicetree/bindings/arm/sunxi.yaml | 9 ++++--
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun50i-h6-pine-h64-modelA.dts | 30 +++++++++++++++++++
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 6 ++--
4 files changed, 41 insertions(+), 5 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts

--
2.23.0
[no subject] [ In reply to ]
Grüße an Sie Mit gebührendem Respekt und Menschlichkeit war ich
gezwungen, Ihnen aus humanitären Gründen zu schreiben.

 Ich heiße Frau Martha Timothy. Ich wurde in Baltimore, Maryland,
geboren und bin mit Eric Timothy, dem Direktor von J.C Industry Togo,
verheiratet.

Wir waren 36 Jahre ohne Kind verheiratet. Er starb nach einer
Operation der Herzarterien.

Und vor kurzem sagte mir mein Arzt, dass ich aufgrund meines
Krebsproblems (Leberkrebs und Schlaganfall) die nächsten sechs Monate
nicht überleben würde.

Bevor mein Mann letztes Jahr starb, gab es diese Summe von 2,8
Millionen Dollar, die er hier in Togo bei einer Bank hinterlegt hat.
Derzeit ist dieses Geld noch auf der Bank.

Nachdem ich meinen Zustand gekannt hatte, entschloss ich mich, diesen
Fonds an jeden gottesfürchtigen Bruder oder jede gottesfürchtige
Schwester zu spenden, der bzw. die diesen Fonds so verwenden wird, wie
ich es hier anweisen werde.

 Ich möchte jemanden, der diesen Fonds nach dem Wunsch meines
verstorbenen verwendet.

Ehemann, um benachteiligten Menschen, Waisenhäusern, Witwen und der
Verbreitung des Wortes Gottes zu helfen.

Ich habe diese Entscheidung getroffen, weil ich kein Kind habe, das
diesen Fonds erbt, und ich möchte nicht weg, wo dieses Geld auf
gottlose Weise verwendet wird.

Aus diesem Grund entscheide ich mich, Ihnen diesen Fonds auszuhändigen.

Ich habe keine Angst vor dem Tod, daher weiß ich, wohin ich gehe. Ich
möchte, dass Sie sich wegen meiner bevorstehenden Krebsoperation in
Ihren täglichen Gebeten immer an mich erinnern.

Schreiben Sie so schnell wie möglich zurück. Wenn sich Ihre Antwort
verzögert, kann ich eine andere Person für den gleichen Zweck gewinnen
und hoffe, so schnell wie möglich von Ihnen lesen zu können.

Gott segne dich, wenn du auf die Stimme des Denkens hörst,

Frau Martha Timothy.
[no subject] [ In reply to ]
Hallo,

Wir verfügen über ein breites Kreditportfolio und sind an der Finanzierung von Großprojekten interessiert. Die Verfahren sind wie folgt:

1-Der Kunde muss eine kurze Zusammenfassung des Projekts senden. Dies muss den für das Projekt erforderlichen Gesamtbetrag, die geschätzte Kapitalrendite und die Kreditrückzahlungsfrist enthalten, die nicht mehr als 15 Jahre betragen darf.

2- Der Kunde muss das besagte Projekt bei einer Versicherungsgesellschaft mit der Gesamtsumme des Darlehens versichern, um das Darlehen als Sicherheit zu gewährleisten.

3- Der Zinssatz beträgt 1% jährlich.

4-Rückzahlungsdauer beträgt 15 Jahre

5 Ab dem Tag, an dem Sie die Versicherungsbescheinigung vorlegen, dauert die Finanzierung ca. 10 Bankarbeitstage.


Wenn Sie mit den oben genannten Verfahren zufrieden sind, senden Sie mir eine Absichtserklärung auf Ihren Firmenbriefkopf.

Für weitere Informationen zur Kreditbeschaffung von: Bitte antworten Sie umgehend auf diese E-Mail:
info@belluccicp.net

Grüße, wie wir auf deine Antwort warten.

Freundliche Grüße
Manuel Baressi
Anzeigenpersonal
WEB: https://www.belluccicp.net
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hicbir sekilde kullanmayiniz ve e-postayi siliniz. Amasya Universitesi bu e-posta mesajinin icerigi ile ilgili olarak hicbir hukuksal sorumlulugu kabul etmez. The information contained in this communication may contain confidential or legally privileged information. Amasya University doesn't accept any legal responsibility for the contents and attachments of this message. The sender does not accept any liability for any errors or omissions or any viruses in the context of this message which arise as a result of internet transmission.
[no subject] [ In reply to ]
Dear Greg,

This is extcon-next pull request for v5.5. I add detailed description of
this pull request on below. Please pull extcon with following updates.

Detailed description for this pull request:
1. Clean up the and fix the minor issue of extcon provider driver
- extcon-intel-cht-wc don't reset the USB data connection at probe time
in order to prevent the removing all devices from bus.
- extcon-sm5502 reset the registers at proble time in order to
prevent the some stuck state. And remove the redundant variable
initialization.

Best Regards,
Chanwoo Choi

The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:

Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-5.5

for you to fetch changes up to ddd1bbbae486ff5913c8fc72c853dcea60713236:

extcon: sm5502: remove redundant assignment to variable cable_type (2019-10-31 13:47:42 +0900)

----------------------------------------------------------------
Colin Ian King (1):
extcon: sm5502: remove redundant assignment to variable cable_type

Stephan Gerhold (1):
extcon: sm5502: Reset registers during initialization

Yauhen Kharuzhy (1):
extcon-intel-cht-wc: Don't reset USB data connection at probe

drivers/extcon/extcon-intel-cht-wc.c | 16 ++++++++++++++--
drivers/extcon/extcon-sm5502.c | 6 +++++-
drivers/extcon/extcon-sm5502.h | 2 ++
3 files changed, 21 insertions(+), 3 deletions(-)


--
Best Regards,
Chanwoo Choi
Samsung Electronics
[no subject] [ In reply to ]
--
????????;

???? ????????? ???????? ????? ??????, ??????? ?????????? 5 ??,
???????????? ???????????????, ??????? ? ????????? ????? ???????? ??
10.9GB, ?? ?? ??????? ????????? ??? ???????? ????? ?????, ???? ??
???????? ?? ????????? ??? ???????? ???? ?????. ????? ????????????
????????????????? ?????? ????????? ?????, ????????? ????????? ??????????
????:

???:
??? ????????????:
??????:
????????????? ??????:
????? ??????????? ?????:
???????:

???? ?? ?? ? ????????? ????????????? ?????????, ??? ???????? ???? ?????
????????!

???????? ????????? ?? ??????????.
??????????? ???: EN: Ru...776774990..2019
????? ??????????? ????????? ©2019

???????
??????? ?????????????
[no subject] [ In reply to ]
[no subject] [ In reply to ]
Es gibt eine Spende in Höhe von 1.000.000 USD in Ihrem Namen. Jetzt müssen Sie nur noch Ihren Spender direkt über die unten stehende E-Mail kontaktieren

E-Mail: truetrotneil@gmail.com
[no subject] [ In reply to ]
???? ?????, ?? ???? ?????? ?????? ?? ?? ?????? ???, ???? ??? ?? ?????
?????, ????? ?? ??????

??? ???? ???????

1 2 3 4 5 6  View All