On Thursday 21 February 2008 14:50, Friedrich Oslage wrote: > Hi,
> > The problem comes from the fact that the firmware is in the disk at
> > /lib/firmware starting from kernel 2.6.18 or something. If you boot
> > the 2617 from the CD it will probably work fine.
> > Anyway even creating a proper initrd with that /lib/firmware the
> > kernel does not load it. Don't know why.
> Using an initrd works fine for me, you probably just forgot to put udev
> in it.
> My initrd basicly looks like this:
> /lib/modules/`uname -r`/modules.dep
> /lib/modules/`uname -r`/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> The script I used to create it is available @
> http://porno-bullen.de/~bluebird/initrd-qla2xxx/ but don't blame me if
> it doesn't work ;)
This is the preferred method -- to let udev handle the firmware loading.
However if you don't have udev in the initrd or it doesn't work, all is not
lost. There's a way to manually load the firmware, but it's tricky. It's
tricky because you have to be very quick -- you'll have maybe up to 4-5
seconds to load the firmware. Here's how:
1) boot the machine (either with an initrd from the hard drive or with an
2) drop to a shell somehow -- I don't run gentoo so I don't know if the
installer has this option but debian does and so does ubuntu for sparc.
3) Load qla2xxx.ko (just modprobe qla2xxx)
4) Find out the device path in /sys (on my sunfire280r
it's /sys/devices/pci0001\:00/0001\:00\:04.0/) It might take you a few tries
to find out. Look for a file /sys/devices/pci0001:00/0001:00:04.0/obppath
with this line
/pci@8,600000/SUNW,qlc@4. (the numbers are not important. the important part
is the qlc bit)
5) Type this: echo 1 > /sys/devices/pci0001:00/0001:00:04.0/loading
6) Type cat /lib/firmware/ql2200_fw.bin > /sys/devices/pci0001:00/0001:00:04.0/data (this is one line)
7) Type echo 0 > /sys/devices/pci0001:00/0001:00:04.0/loading
for 5), 6) and 7) you'll get error message file not found. It doesn't matter.
The point is to cache these three command into the shell history so you can
recall them quickly when you need them. Remember, you have a window of a few
seconds and regardless how fast you type you won't make it without using
8) Unload qla2xxx (rmmod qla2xxx)
9) Now load the kernel module again (modprobe qla2xxx). The clock starts
ticking now. The module tells the kernel that it needs a firmware before the
hardware can be initialized. The module creates a device path in /sys and
creates two files, loading and data.
10) Quickly recall from history the command from 5) and press enter
11) Quickly recall from history the command from 6) and press enter
12) Quickly recall from history the command from 7) and press enter
You'll see messages that the card was initialized. Now you can load sd_mod.
If you had to resort to this, then chances are you don't have udev running so
you may have to manually create the device nodes in /dev. For your
brw-rw---- 1 root disk 8, 0 2008-02-21 15:03 /dev/sda
brw-rw---- 1 root disk 8, 1 2008-02-21 15:03 /dev/sda1
brw-rw---- 1 root disk 8, 2 2008-02-21 15:03 /dev/sda2
brw-rw---- 1 root disk 8, 3 2008-02-21 15:03 /dev/sda3
brw-rw---- 1 root disk 8, 4 2008-02-21 15:03 /dev/sda4
brw-rw---- 1 root disk 8, 5 2008-02-21 15:03 /dev/sda5
brw-rw---- 1 root disk 8, 16 2008-02-21 15:03 /dev/sdb
brw-rw---- 1 root disk 8, 17 2008-02-21 15:03 /dev/sdb1
brw-rw---- 1 root disk 8, 18 2008-02-21 15:03 /dev/sdb2
brw-rw---- 1 root disk 8, 19 2008-02-21 15:03 /dev/sdb3
brw-rw---- 1 root disk 8, 20 2008-02-21 15:03 /dev/sdb4
Once you have all the device nodes in /dev you can go back to the installer
and resume. Make sure you install udev and make sure you copy the binary
firmware into /lib/firmware.
If you're not fast enough the two files loading and data will disappear. If
this happens, don't worry, just unload qla2xxx and load it again, and this
time make sure you're faster :-)
I've done this in the past and I can guarantee that it works.
2.6.17 was the last kernel where the fimrware was built into the module and
you didn't have to load it separately. If you can live with that old kernel,
you can downgrade.
firstname.lastname@example.org mailing list