Mailing List Archive

vg224 port problem
Have anyone ever had a vg224 analog gateway port go bad. I have only battery at the port No dial tone.. (Only on one port, the others appear to be fine). We have tried reseting port in Call Manager, shut and no shut on the voice port in the analog gateway, reloading the analog gateway, and power cycling the analog gateway. And none of these worked in restoring dial tone.

Could this be just a bad port on the vg224.

Has anyone experienced this. Is there other test that can be done in troubleshooting this issue.

Thanks

Robert
Re: vg224 port problem [ In reply to ]
Yes, 1 port bad, 2+ ports bad.

I have had to replace at least 3 or 4 of my VG224s.



John





From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Robert
Shearrill
Sent: Thursday, August 26, 2010 10:10 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] vg224 port problem



Have anyone ever had a vg224 analog gateway port go bad. I have only
battery at the port No dial tone.. (Only on one port, the others appear
to be fine). We have tried reseting port in Call Manager, shut and no
shut on the voice port in the analog gateway, reloading the analog
gateway, and power cycling the analog gateway. And none of these worked
in restoring dial tone.



Could this be just a bad port on the vg224.



Has anyone experienced this. Is there other test that can be done in
troubleshooting this issue.



Thanks



Robert


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
Re: vg224 port problem [ In reply to ]
i have had ports go bad. on more than one. make sure you have a spare RJ21 cable you can use to isolate the problem to the gateway and eliminate bad pairs and cross connects. causes can be anything from faulty wiring to lightning strikes. make sure you have good lightning arestors on all your pairs.

i typically wait until two or three ports go bad before returning it though. it's not that uncommon.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
- LFJ (with apologies to Mr. Popeil)



From: "Robert Shearrill" <rshearri@uchicago.edu>
To: cisco-voip@puck.nether.net
Sent: Thursday, August 26, 2010 10:10:16 AM
Subject: [cisco-voip] vg224 port problem


Have anyone ever had a vg224 analog gateway port go bad. I have only battery at the port No dial tone.. (Only on one port, the others appear to be fine). We have tried reseting port in Call Manager, shut and no shut on the voice port in the analog gateway, reloading the analog gateway, and power cycling the analog gateway. And none of these worked in restoring dial tone.

Could this be just a bad port on the vg224.

Has anyone experienced this. Is there other test that can be done in troubleshooting this issue.

Thanks

Robert
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Re: vg224 port problem [ In reply to ]
Just ran across this today:

PSC-AVGW-9#sh stc dev sum
....
2/21 AN0C863BE468415 IS IDLE ALG 41006 CCM
2/22 AN0C863BE468416 OOS UNREGISTERED ALG Not Avail UNKN
2/23 AN0C863BE468417 IS IDLE ALG 41036 CCM
...

Anyone know if 2/22 is indicative of a bad port, or is there some
other reason it would go OOS? It's at a regional campus, so i'm still
waiting on someone at the site to eyeball it and check cross-connects
etc.

On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio@uoguelph.ca> wrote:
> i have had ports go bad. on more than one. make sure you have a spare RJ21
> cable you can use to isolate the problem to the gateway and eliminate bad
> pairs and cross connects. causes can be anything from faulty wiring to
> lightning strikes. make sure you have good lightning arestors on all your
> pairs.
>
> i typically wait until two or three ports go bad before returning it though.
> it's not that uncommon.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Robert Shearrill" <rshearri@uchicago.edu>
> To: cisco-voip@puck.nether.net
> Sent: Thursday, August 26, 2010 10:10:16 AM
> Subject: [cisco-voip] vg224 port problem
>
> Have anyone ever had a vg224 analog gateway port go bad. I have only battery
> at the port No dial tone.. (Only on one port, the others appear to be
> fine).  We have tried reseting port in Call Manager, shut and no shut on the
> voice port in the analog gateway, reloading the analog gateway, and power
> cycling the analog gateway. And none of these worked in restoring dial tone.
>
> Could this be just a bad port on the vg224.
>
> Has anyone experienced this. Is there other test that can be done in
> troubleshooting this issue.
>
> Thanks
>
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



--
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Re: vg224 port problem [ In reply to ]
have you got the service for mgcp or skinny assigned to the port ?


Regards,

John Van Laecke
Network Administrator

GHD Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
Water | Energy & Resources | Environment | Property & Buildings |
Transportation

Please consider the environment before printing this email



From:
Ed Leatherman <ealeatherman@gmail.com>
To:
Lelio Fulgenzi <lelio@uoguelph.ca>
Cc:
cisco-voip@puck.nether.net
Date:
27/08/2010 11:54 PM
Subject:
Re: [cisco-voip] vg224 port problem
Sent by:
cisco-voip-bounces@puck.nether.net



Just ran across this today:

PSC-AVGW-9#sh stc dev sum
....
2/21 AN0C863BE468415 IS IDLE ALG 41006 CCM
2/22 AN0C863BE468416 OOS UNREGISTERED ALG Not Avail UNKN
2/23 AN0C863BE468417 IS IDLE ALG 41036 CCM
...

Anyone know if 2/22 is indicative of a bad port, or is there some
other reason it would go OOS? It's at a regional campus, so i'm still
waiting on someone at the site to eyeball it and check cross-connects
etc.

On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio@uoguelph.ca>
wrote:
> i have had ports go bad. on more than one. make sure you have a spare
RJ21
> cable you can use to isolate the problem to the gateway and eliminate
bad
> pairs and cross connects. causes can be anything from faulty wiring to
> lightning strikes. make sure you have good lightning arestors on all
your
> pairs.
>
> i typically wait until two or three ports go bad before returning it
though.
> it's not that uncommon.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
> - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Robert Shearrill" <rshearri@uchicago.edu>
> To: cisco-voip@puck.nether.net
> Sent: Thursday, August 26, 2010 10:10:16 AM
> Subject: [cisco-voip] vg224 port problem
>
> Have anyone ever had a vg224 analog gateway port go bad. I have only
battery
> at the port No dial tone.. (Only on one port, the others appear to be
> fine). We have tried reseting port in Call Manager, shut and no shut on
the
> voice port in the analog gateway, reloading the analog gateway, and
power
> cycling the analog gateway. And none of these worked in restoring dial
tone.
>
> Could this be just a bad port on the vg224.
>
> Has anyone experienced this. Is there other test that can be done in
> troubleshooting this issue.
>
> Thanks
>
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



--
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_____________________
This e-mail has been scanned for viruses by MessageLabs.



_____________________
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________
This e-mail has been scanned for viruses by MessageLabs.
Re: vg224 port problem [ In reply to ]
All SCCP

On Mon, Aug 30, 2010 at 9:26 PM, <John.VanLaecke@ghd.com> wrote:

> have you got the service for mgcp or skinny assigned to the port ?
>
>
> Regards,
> *
> John Van Laecke **
> Network Administrator **
> **
> GHD** **Accomplish **More** Together*
> T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com
> Level 2, 201 Charlotte Street QLD AUSTRALIA | *www.ghd.com.au*<http://www.ghd.com.au/_>
>
> *Water* <http://www.ghd.com/sectors/water/> | *Energy & Resources*<http://www.ghd.com/global/sectors/energy--resources/>|
> *Environment* <http://www.ghd.com/sectors/environment/> | *Property &
> Buildings* <http://www.ghd.com/global/sectors/property--buildings/> | *
> Transportation* <http://www.ghd.com/global/sectors/transportation/>
>
> Please consider the environment before printing this email
>
>
> From: Ed Leatherman <ealeatherman@gmail.com> To:
> Lelio Fulgenzi <lelio@uoguelph.ca>
> Cc:
> cisco-voip@puck.nether.net
> Date: 27/08/2010 11:54 PM Subject: Re: [cisco-voip] vg224 port problem Sent
> by: cisco-voip-bounces@puck.nether.net
> ------------------------------
>
>
>
> Just ran across this today:
>
> PSC-AVGW-9#sh stc dev sum
> ....
> 2/21 AN0C863BE468415 IS IDLE ALG 41006 CCM
> 2/22 AN0C863BE468416 OOS UNREGISTERED ALG Not Avail UNKN
> 2/23 AN0C863BE468417 IS IDLE ALG 41036 CCM
> ...
>
> Anyone know if 2/22 is indicative of a bad port, or is there some
> other reason it would go OOS? It's at a regional campus, so i'm still
> waiting on someone at the site to eyeball it and check cross-connects
> etc.
>
> On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio@uoguelph.ca>
> wrote:
> > i have had ports go bad. on more than one. make sure you have a spare
> RJ21
> > cable you can use to isolate the problem to the gateway and eliminate bad
> > pairs and cross connects. causes can be anything from faulty wiring to
> > lightning strikes. make sure you have good lightning arestors on all your
> > pairs.
> >
> > i typically wait until two or three ports go bad before returning it
> though.
> > it's not that uncommon.
> >
> > ---
> > Lelio Fulgenzi, B.A.
> > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > Cooking with unix is easy. You just sed it and forget it.
> > - LFJ (with apologies to Mr. Popeil)
> >
> >
> > ________________________________
> > From: "Robert Shearrill" <rshearri@uchicago.edu>
> > To: cisco-voip@puck.nether.net
> > Sent: Thursday, August 26, 2010 10:10:16 AM
> > Subject: [cisco-voip] vg224 port problem
> >
> > Have anyone ever had a vg224 analog gateway port go bad. I have only
> battery
> > at the port No dial tone.. (Only on one port, the others appear to be
> > fine). We have tried reseting port in Call Manager, shut and no shut on
> the
> > voice port in the analog gateway, reloading the analog gateway, and power
> > cycling the analog gateway. And none of these worked in restoring dial
> tone.
> >
> > Could this be just a bad port on the vg224.
> >
> > Has anyone experienced this. Is there other test that can be done in
> > troubleshooting this issue.
> >
> > Thanks
> >
> > Robert
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
>
> --
> Ed Leatherman
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
>
> _____________________
> This email and all attachments are confidential. For further important
> information about emails sent to or from GHD or if you have received this
> email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>



--
Ed Leatherman
Re: vg224 port problem [ In reply to ]
make sure the port has all this information.


dial-peer voice 603 pots
service stcapp
port 0/1/3




Regards,

John Van Laecke
Network Administrator

GHD Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
Water | Energy & Resources | Environment | Property & Buildings |
Transportation

Please consider the environment before printing this email



From:
Ed Leatherman <ealeatherman@gmail.com>
To:
John.VanLaecke@ghd.com
Cc:
cisco-voip@puck.nether.net, cisco-voip-bounces@puck.nether.net, Lelio
Fulgenzi <lelio@uoguelph.ca>
Date:
31/08/2010 09:48 PM
Subject:
Re: [cisco-voip] vg224 port problem



All SCCP

On Mon, Aug 30, 2010 at 9:26 PM, <John.VanLaecke@ghd.com> wrote:
have you got the service for mgcp or skinny assigned to the port ?


Regards,

John Van Laecke
Network Administrator

GHD Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
Water | Energy & Resources | Environment | Property & Buildings |
Transportation

Please consider the environment before printing this email



From:
Ed Leatherman <ealeatherman@gmail.com>
To:
Lelio Fulgenzi <lelio@uoguelph.ca>
Cc:
cisco-voip@puck.nether.net
Date:
27/08/2010 11:54 PM
Subject:
Re: [cisco-voip] vg224 port problem
Sent by:
cisco-voip-bounces@puck.nether.net





Just ran across this today:

PSC-AVGW-9#sh stc dev sum
....
2/21 AN0C863BE468415 IS IDLE ALG 41006 CCM
2/22 AN0C863BE468416 OOS UNREGISTERED ALG Not Avail UNKN
2/23 AN0C863BE468417 IS IDLE ALG 41036 CCM
...

Anyone know if 2/22 is indicative of a bad port, or is there some
other reason it would go OOS? It's at a regional campus, so i'm still
waiting on someone at the site to eyeball it and check cross-connects
etc.

On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio@uoguelph.ca>
wrote:
> i have had ports go bad. on more than one. make sure you have a spare
RJ21
> cable you can use to isolate the problem to the gateway and eliminate
bad
> pairs and cross connects. causes can be anything from faulty wiring to
> lightning strikes. make sure you have good lightning arestors on all
your
> pairs.
>
> i typically wait until two or three ports go bad before returning it
though.
> it's not that uncommon.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
> - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Robert Shearrill" <rshearri@uchicago.edu>
> To: cisco-voip@puck.nether.net
> Sent: Thursday, August 26, 2010 10:10:16 AM
> Subject: [cisco-voip] vg224 port problem
>
> Have anyone ever had a vg224 analog gateway port go bad. I have only
battery
> at the port No dial tone.. (Only on one port, the others appear to be
> fine). We have tried reseting port in Call Manager, shut and no shut on
the
> voice port in the analog gateway, reloading the analog gateway, and
power
> cycling the analog gateway. And none of these worked in restoring dial
tone.
>
> Could this be just a bad port on the vg224.
>
> Has anyone experienced this. Is there other test that can be done in
> troubleshooting this issue.
>
> Thanks
>
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



--
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_____________________
This e-mail has been scanned for viruses by MessageLabs.


_____________________
This email and all attachments are confidential. For further important
information about emails sent to or from GHD or if you have received this
email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________
This e-mail has been scanned for viruses by MessageLabs.



--
Ed Leatherman


_____________________
This e-mail has been scanned for viruses by MessageLabs.


_____________________
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________
This e-mail has been scanned for viruses by MessageLabs.
Re: vg224 port problem [ In reply to ]
I'm having a similar problem on a new install of sccp vg224. I've only
installed a few of these, but they have gone fine, until this one. I was
thinking I missed something in the config.

When you say "battery", does that mean you have side tone (can hear
yourself).?are any of your ports registered doing this? Mine are.

-I compared my config to another router, and it's identical.
-I changed the cable
-Re punched
-changed out the block.

not sure what debug commands ti run.I'm waiting on a replacement vg224 to
swap out

On Tuesday, August 31, 2010, <John.VanLaecke@ghd.com> wrote:
> make sure the port has all this information.
>
>
> dial-peer voice 603 pots
> service stcapp
> port 0/1/3
>
>
>
>
> Regards,
>
> John Van Laecke
> Network Administrator
>
> GHD Accomplish More Together
> T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com
> Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
>
> Water | Energy & Resources | Environment | Property & Buildings |
Transportation
>
> Please consider the environment before printing this email
>
>
> From: Ed Leatherman <ealeatherman@gmail.com>
> To: John.VanLaecke@ghd.com
> Cc: cisco-voip@puck.nether.net, cisco-voip-bounces@puck.nether.net, Lelio
Fulgenzi <lelio@uoguelph.ca>
> Date: 31/08/2010 09:48 PM
> Subject: Re: [cisco-voip] vg224 port problem
> ________________________________
>
>
> All SCCP
>
> On Mon, Aug 30, 2010 at 9:26 PM, <John.VanLaecke@ghd.com> wrote:
> have you got the service for mgcp or skinny assigned to the port ?
>
>
> Regards,
>
> John Van Laecke
> Network Administrator
>
> GHD Accomplish More Together
> T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com
> Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
> Water | Energy & Resources | Environment | Property & Buildings |
Transportation
>
> Please consider the environment before printing this email
>
> From: Ed Leatherman <ealeatherman@gmail.com>
> To: Lelio Fulgenzi <lelio@uoguelph.ca>
> Cc: cisco-voip@puck.nether.net
> Date: 27/08/2010 11:54 PM
> Subject: Re: [cisco-voip] vg224 port problem
> Sent by: cisco-voip-bounces@puck.nether.net
>
> ________________________________
>
>
>
> Just ran across this today:
>
> PSC-AVGW-9#sh stc dev sum
> ....
> 2/21 AN0C863BE468415 IS IDLE ALG 41006 CCM
> 2/22 AN0C863BE468416 OOS UNREGISTERED ALG Not Avail UNKN
> 2/23 AN0C863BE468417 IS IDLE ALG 41036 CCM
> ...
>
> Anyone know if 2/22 is indicative of a bad port, or is there some
> other reason it would go OOS? It's at a regional campus, so i'm still
> waiting on someone at the site to eyeball it and check cross-connects
> etc.
>
> On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio@uoguelph.ca>
wrote:
>> i have had ports go bad. on more than one. make sure you have a spare
RJ21
>> cable you can use to isolate the problem to the gateway and eliminate bad
>> pairs and cross connects. causes can be anything from faulty wiring to
>> lightning strikes. make sure you have good lightning arestors on all your
>> pairs.
>>
>> i typically wait until two or three ports go bad before returning it
though.
>> it's not that uncommon.
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>> - LFJ (with apologies to Mr. Popeil)
>>
>>
>> ________________________________
>> From: "Robert Shearrill" <rshearri@uchicago.edu>
>> To: cisco-voip@puck.nether.net
>> Sent: Thursday, August 26, 2010 10:10:16 AM
>> Subject: [cisco-voip] vg224 port problem
>>
>> Have anyone ever had a vg224 analog gateway port go bad. I have only
battery
>> at the port No dial tone.. (Only on one port, the others appear to be
>> fine). We have tried reseting port in Call Manager, shut and no shut on
the
>> voice port in the analog gateway, reloading the analog gateway, and power
>> cycling the analog gateway. And none of these worked in restoring dial
tone.
>>
>> Could this be just a bad port on the vg224.
>>
>> Has anyone experienced this. Is there other test that can be done in
>> troubleshooting this issue.
>>
>> Thanks
>>
>> Robert
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
>
> --
> Ed Leatherman
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
>
> _____________________
> This email and all attachments are confidential. For further important
information about emails sent to or from GHD or if you have received this
email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
>
>
> --
> Ed Leatherman
>
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
> _____________________
> This email and all attachments are confidential. For further important
information about emails sent to or from GHD or if you have received this
email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
Re: vg224 port problem [ In reply to ]
IM running ver 12.4 on VG224's and I have one that has lost the voice ports.
I tried building them back, but the command line for voice-ports is not in the configuration menu anymore.
Can anyone tell me how do I build the voice ports back? In the vg224 running sccp

From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Frank Arrasmith
Sent: Sunday, April 15, 2012 12:34 PM
To: John.VanLaecke@ghd.com
Cc: cisco-voip-bounces@puck.nether.net; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] vg224 port problem

I'm having a similar problem on a new install of sccp vg224. I've only installed a few of these, but they have gone fine, until this one. I was thinking I missed something in the config.

When you say "battery", does that mean you have side tone (can hear yourself).?are any of your ports registered doing this? Mine are.

-I compared my config to another router, and it's identical.
-I changed the cable
-Re punched
-changed out the block.

not sure what debug commands ti run.I'm waiting on a replacement vg224 to swap out

On Tuesday, August 31, 2010, <John.VanLaecke@ghd.com<mailto:John.VanLaecke@ghd.com>> wrote:
> make sure the port has all this information.
>
>
> dial-peer voice 603 pots
> service stcapp
> port 0/1/3
>
>
>
>
> Regards,
>
> John Van Laecke
> Network Administrator
>
> GHD Accomplish More Together
> T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com<mailto:John.vanlaecke@ghd.com>
> Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au<http://www.ghd.com.au>
>
> Water | Energy & Resources | Environment | Property & Buildings | Transportation
>
> Please consider the environment before printing this email
>
>
> From: Ed Leatherman <ealeatherman@gmail.com<mailto:ealeatherman@gmail.com>>
> To: John.VanLaecke@ghd.com<mailto:John.VanLaecke@ghd.com>
> Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>, cisco-voip-bounces@puck.nether.net<mailto:cisco-voip-bounces@puck.nether.net>, Lelio Fulgenzi <lelio@uoguelph.ca<mailto:lelio@uoguelph.ca>>
> Date: 31/08/2010 09:48 PM
> Subject: Re: [cisco-voip] vg224 port problem
> ________________________________
>
>
> All SCCP
>
> On Mon, Aug 30, 2010 at 9:26 PM, <John.VanLaecke@ghd.com<mailto:John.VanLaecke@ghd.com>> wrote:
> have you got the service for mgcp or skinny assigned to the port ?
>
>
> Regards,
>
> John Van Laecke
> Network Administrator
>
> GHD Accomplish More Together
> T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com<mailto:John.vanlaecke@ghd.com>
> Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au<http://www.ghd.com.au>
> Water | Energy & Resources | Environment | Property & Buildings | Transportation
>
> Please consider the environment before printing this email
>
> From: Ed Leatherman <ealeatherman@gmail.com<mailto:ealeatherman@gmail.com>>
> To: Lelio Fulgenzi <lelio@uoguelph.ca<mailto:lelio@uoguelph.ca>>
> Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
> Date: 27/08/2010 11:54 PM
> Subject: Re: [cisco-voip] vg224 port problem
> Sent by: cisco-voip-bounces@puck.nether.net<mailto:cisco-voip-bounces@puck.nether.net>
>
> ________________________________
>
>
>
> Just ran across this today:
>
> PSC-AVGW-9#sh stc dev sum
> ....
> 2/21 AN0C863BE468415 IS IDLE ALG 41006 CCM
> 2/22 AN0C863BE468416 OOS UNREGISTERED ALG Not Avail UNKN
> 2/23 AN0C863BE468417 IS IDLE ALG 41036 CCM
> ...
>
> Anyone know if 2/22 is indicative of a bad port, or is there some
> other reason it would go OOS? It's at a regional campus, so i'm still
> waiting on someone at the site to eyeball it and check cross-connects
> etc.
>
> On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio@uoguelph.ca<mailto:lelio@uoguelph.ca>> wrote:
>> i have had ports go bad. on more than one. make sure you have a spare RJ21
>> cable you can use to isolate the problem to the gateway and eliminate bad
>> pairs and cross connects. causes can be anything from faulty wiring to
>> lightning strikes. make sure you have good lightning arestors on all your
>> pairs.
>>
>> i typically wait until two or three ports go bad before returning it though.
>> it's not that uncommon.
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>> - LFJ (with apologies to Mr. Popeil)
>>
>>
>> ________________________________
>> From: "Robert Shearrill" <rshearri@uchicago.edu<mailto:rshearri@uchicago.edu>>
>> To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
>> Sent: Thursday, August 26, 2010 10:10:16 AM
>> Subject: [cisco-voip] vg224 port problem
>>
>> Have anyone ever had a vg224 analog gateway port go bad. I have only battery
>> at the port No dial tone.. (Only on one port, the others appear to be
>> fine). We have tried reseting port in Call Manager, shut and no shut on the
>> voice port in the analog gateway, reloading the analog gateway, and power
>> cycling the analog gateway. And none of these worked in restoring dial tone.
>>
>> Could this be just a bad port on the vg224.
>>
>> Has anyone experienced this. Is there other test that can be done in
>> troubleshooting this issue.
>>
>> Thanks
>>
>> Robert
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
>
> --
> Ed Leatherman
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
>
> _____________________
> This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
>
>
> --
> Ed Leatherman
>
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
> _____________________
> This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>