Mailing List Archive

Re: me3600 svi's not showing in and out bit counts that isee on corresponding phy int
on 4900M

!
int vlan NNN
counter
!

did help
(yes i know the 4900M ist not a "metro" switch)

Mit freundlichen Gru?en
Kind regards
Veuillez agreer mes salutations distinguees
Met vriendelijke groet

Juergen.

> Try to set the load-interval to 30s, then check again.
> Xu Hu
>
> On 8 Aug, 2012, at 21:54, "Aaron" <aaron1@gvtc.com> wrote:
> > anybody know why me3600 svi doesn't seem to show in and out
> bit counts that
> > the underlying phy int shows? ....all svi's (10,11,13) are
> in a vrf running
> > over mpls l3vpn
> >
> > 3600#sh int vl 10 | in 30 sec
> > 30 second input rate 2000 bits/sec, 3 packets/sec
> > 30 second output rate 1000 bits/sec, 3 packets/sec
> >
> > 3600#sh int g0/1 | in 30 sec
> > 30 second input rate 402000 bits/sec, 359 packets/sec
> > 30 second output rate 6157000 bits/sec, 613 packets/sec
[...]

_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/